Specifications - Alamo Bush Hog HDE-2 Series Operator's Manual

MODEL
HDE2049KT2.......................................20 HP Kohler 7000 Series KT715.............................................. 49" Deck
HDE2249FS2.......................................22 HP Kawasaki FS651 ..............................................................49" Deck
HDE2549PS2.......................................25 HP Briggs and Stratton Pro Series ........................................49'' Deck
HDE2255FS2.......................................22 HP Kawasaki FS651 ..............................................................55" Deck
HDE2555KP2.......................................25 HP Kohler 7000 Series+ PRO Filtration.................................55" Deck
HDE2555PS2.......................................25 HP Briggs and Stratton Pro Series ........................................55" Deck
HDE2261FS2.......................................22 HP Kawasaki FS651 ..............................................................61" Deck
HDE2561KP2.......................................25 HP Kohler 7000 Series+ PRO Filtration.................................61" Deck
HDE2561PS2.......................................25 HP Briggs and Stratton Pro Series ........................................61" Deck
CONTROLS.........................................Electronic Control Module with Keyless Start, System Monitoring and
PTO......................................................Electromagnetic Clutch rated at 175 FT/LBS
FUEL CAPACITY.................................8 Gallons (87 Octane Unleaded Gasoline)
TRANSAXLES.....................................(2) Hydro-Gear ZT3100 Hydrostats
TIRES ..................................................Front - 13 x 6.5 - 6
TREAD WIDTH....................................50"
HEIGHT to TOP OF SEAT BACK .......47" Non Suspension Seat / 51" Full Suspension Seat
STEERING...........................................Dampened Twin Lever, Adjustable Fore, Aft and Vertical
SPEED.................................................Infinitely Variable 0-8 mph Forward, 0-4 mph Reverse
CUTTING WIDTHS..............................49" .......................55" .......................61"
OVERALL WIDTH (CHUTE DOWN) ...63" .......................69" .......................75"
BLADES (Standard) ...........................(3) 17" Uplift.........(3) 19" Uplift.........(3) 21" Uplift
CUTTING HEIGHTS ............................1-1/2" to 5" Adjustable in 1/4" Increments
DECK CONSTRUCTION.....................7 Gauge reinforced steel
HDE-2 ZT 04/18
© 2018 Alamo Group Inc.
INTRODUCTION

SPECIFICATIONS

HDE Series Zero Turn Mower
ENGINE
Soft Start PTO Engage
Rear - 23 x 10.5 - 12 (Selection of Turf Tire or Bar Tire)
DECK SPECIFICATIONS
SAFETY
Integrated Operator Presence Controls
2-7/8" Round Tube ROPS
Seat Belts
Introduction Section 2-3
CUTTING WIDTH