Audio Menu; Setup Menu; Information Menu - Optoma CinemaX P1 User Manual

USING THE PROJECTOR

Audio menu

Internal Speaker
Choose "On" or "Off" to turn on or off the internal speaker.
Internal Speaker
Mute
Use this option to temporarily turn off the sound.
‡ On: Choose "On" to turn mute on.
‡ Off: Choose "Off" to turn mute off.
Note: "Mute" function affects both internal and external speaker volume.
Volume
Adjust the audio volume level.
Note:
Volume cannot not be adjusted if the audio output is via HDMI ARC or S/PDIF.
Digital Output
Select the digital audio output format between "Bitstream", "PCM", and "Auto".
Sound Effect
Select the sound effect between "Movie", "Music", "Sport", "Game", and "Night".
Internal Speaker Delay (ms)
Set the internal speaker delay in milliseconds.
Digital Output Delay (ms)
Set the digital output delay in milliseconds.

Setup menu

Projection Mode
Select the preferred projection between "Front" and "Rear". Refer to page 14.
Test Pattern
Select the test pattern from "Green Grid", "Magenta Grid", "White Grid", "White", and "Yellow Border".
Press " " to exit the Test Pattern menu.
High Altitude
When "On" is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Focus
Press the "Left" or "Right" button on the remote control to focus the projected image.
OSD Focus

Information menu

View the projector information as listed below:
‡ Display
‡ Hardware
‡ Input Source
‡ About
34 English