Using Quiet Mode; Using Holiday Mode; Reading Out Information; To Configure Time And Date - Daikin Altherma EAVZ16S23DA6V User Reference Manual

4 Operation
User pin code
The User pin code is 0000.
4.6.1

Using quiet mode

About quiet mode
You can use quiet mode to decrease the sound of the outdoor unit.
However, this also decreases the heating capacity of the system.
There are multiple quiet mode levels.
You can:
▪ Completely deactivate quiet mode
▪ Manually activate a quiet mode level until the next scheduled
action
▪ Use and program a quiet mode schedule
INFORMATION
If the outdoor temperature is below zero, we recommend to
NOT use the most quiet level.
To check if quiet mode is active
To use quiet mode
1 Go to [7.4.1]: User settings > Quiet > Activation.
2 Do one of the following:
If you want to...
Completely deactivate Select Off.
quiet mode
Manually activate a quiet Select the applicable quiet
mode level mode level. Example: Most
quiet.
Use and program a quiet Select Automatic.
mode schedule
Go to [7.4.2] Schedule and
program the schedule. For
more information about
scheduling, see
"4.7.4 Schedule screen:
Example" on
Usage example: Baby is sleeping in the afternoon
If you are in the following situation:
▪ You have programmed a quiet mode schedule:
▪ During the night: Most quiet.
▪ During the day: Off to ensure the heating capacity of the
system.
▪ However, during the afternoon the baby is sleeping and you want
it to be quiet.
Then you can do the following:
1 Go to [7.4.1]: User settings > Quiet > Activation.
2 Select Most quiet.
Advantage:
The outdoor unit runs in its most quiet level.
4.6.2

Using holiday mode

About holiday mode
During your holiday, you can use the holiday mode to deviate from
your normal schedules without having to change them. While holiday
mode is active, space heating operation and domestic hot water
operation will be turned off. Room frost protection and anti-legionella
operation will remain active.
User reference guide
10
—
Then...
page 12.
Typical workflow
Using holiday mode typically consists of the following stages:
1 Setting the starting date and ending date of your holiday.
2 Activating the holiday mode.
To check if holiday mode is activated and/or running
If is activated on the home screen, holiday mode is active.
To configure the holiday
1 Activate the holiday mode.
▪ Go to [7.3.1]: User settings > Holiday > Activation.
▪ Select On.
2 Set the first day of your holiday.
▪ Go to [7.3.2]: From.
▪ Select a date.
▪ Confirm the changes.
3 Set the last day of your holiday.
▪ Go to [7.3.3]: Till.
▪ Select a date.
▪ Confirm the changes.
4.6.3

Reading out information

To read out information
1 Go to [8]: Information.
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
[8.8] Connection status
4.6.4

To configure time and date

1 Go to [7.2] User settings > Time/date.
—
—
—
You can read out...
Produced energy, consumed
electricity, and consumed gas
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot
water, outside, and leaving water
temperature (if applicable)
Status/mode of each actuator
Example: Domestic hot water
pump ON/OFF
Current operation mode
Example: Defrost/oil return
mode
Version information about the
system
Information about the connection
status of the unit, the room
thermostat and the LAN adapter.
EAVZ16S18+23DA6V+9W
Daikin Altherma – Low temperature split
4P556076-1 – 2018.10