Installing The Internal Pc (Optional) - NewLine RS Series Quick Start Manual

Installing the Internal PC (Optional)

CAUTION
The internal PC does not support hot plugging. Therefore, you must insert or remove it when the
You will need to purchase the internal PC separately. Perform the following steps to install the
internal PC.
Step 1: Unscrew the M3 screws by
hand to remove the internal PC
shielding cover.
Step 3: Secure the internal PC to the
display by using the M3 screws.
off .Otherwise,the screen or internal PC may be damaged.
Step 2: Push the internal into the
internal PC port at the rear of
the screen from right to left.
Step 4: Ensure the installation is
correct before turning the
power on again.
M3
M3
17
ay be damaged.