Installation
The dimensions of the four bracket mounting holes on the back panel are VESA
MIS-Fcompliant (TT-9818RS, TT-8618RS or TT-7518RS: 800 x 400 mm/31.50 x
15.75 in; TT-6518RS: 600 x 400 mm/23.62 x 15.75 in). Use metric M8 screws with
length of 10 mm to 15 mm (0.40 to 0.59 in) to secure the touch screen with the
mounting system. Dimensions of themounting holes on the back panel are shown
on the following figure.
Note
Consult a professional installer to install the display product.
TT-9818RS:
800mm(31.50 in)
M 8
M 8
15
M8
M 8