Instant Pot Duo Series User Manual page 16

• Make sure the steam release valve, float valve and anti-block shield are clean
and free of debris.
• After putting the lid on, make sure the float valve on lid top drops down.
• Do not put the lid on for the Sauté program.
Initial Test Run
To familiarize yourself with the Instant Pot
Add 3 measuring cups of water into the inner pot (~25 fl oz / 750 mL).
1
Close the lid. Turn the steam release handle to Sealing position.
2
Press the Steam button and press the + / - keys to adjust
3
time to 2 minutes.
The preheating cycle will start after 10 seconds and the cooker with display On. Traces of
steam will release until the float valve pops up. The Steam program will begin when
working pressure is reached. After the cooking cycle has completed, the cooker will beep
and switch to Keep Warm mode if the Auto Keep Warm function is ON.
*If you have any questions or concerns, please refer to the troubleshooting guide on pages
24 - 26, or call the customer care team. Contact information on page 24.*
14
Getting Started
and check if the cooker is working properly:
®