Troubleshooting - Paramount Fitness KLD7003S Use And Care Manual

Troubleshooting

PROBLEM
Main burner does not light.
Low burner flame.
Reflector and emitter
screen appear black.
Thick black smoke.
Review & Warranty Extension
JR HOME
COLLECTION
Extend Your Warranty By Leaving A Review
We want your opinion about your purchase...and we want you to tell everyone about it!
Just leave a review for the product on the retailers website where you made your purchase, or at
www.paramountathome.com, and fill in the online warranty at www.paramountathome.com/
warranty to receive a complimentary extra year of warranty protection.
POSSIBLE CAUSE
Gas valve may be off.
Fuel tank may be empty.
Orifice blocked.
Air in supply system.
Loose connection.
Igniter fails.
Gas pressure low with valve open full.
New cylinder or first ignition.
Cylinder valve on, no gas flow.
Pressure is low.
Tank is low on fuel.
Gas hose is kinked.
Control knob at max.
Carbon on the reflector and the emitter screen.
Blockage in the burner assembly.
Follow us on:
www.paramountathome.com
Turn the gas valve ON.
Refill the LPG tank.
Clean or replace the orifice.
Purge air from the lines. Open gas lines and depress
the control knob for 2-3 minutes.
Check all fittings.
Use a stick lighter to manually light.
Replace the cylinder or regulator.
Purge air from the lines.
Replace the hose/regulator assembly.
Replace the LPG tank.
Fill the LPG tank.
Check & straighten or replace.
Check for obstructions at passageways and orifices.
Clean components as needed.
Thoroughly clean the burner.
14
CORRECTIVE ACTION