Paramount Fitness KLD7003S Use And Care Manual page 6

Assembly - (continued)
3
Attaching The Anchoring Arms
□ Attach one anchoring arm (I) to the base of the tank
assembly (E) with two M6x12 screw s (AA) and two M6
nuts (BB) as shown. Repeat for the other 2 anchoring arms
(I) so all 3 are attached to the base of the tank assembly
(E).
□ Once the heater is completely assembled, if you wish to
anchor the heater to the ground, insert the anchoring pins
(H) through the anchoring arms (I) and directly into the
ground as shown.
NOTE: Only 2 anchoring arms can be used in
conjunction with wheel assembly.
4
Attaching The Protection Guard
□ Attach the protection guards (C), longer ends down, to the
holes on the top of the tank assembly (E).
□ Use eight M6 nuts (BB) to tighten the protection guards (C).
I
C
E
6
E
H