Maintenance And Repairs - Jetter JX3-BN-EC User Manual

Jetter AG

8 Maintenance and repairs

8.1 Maintenance, repairs and disposal
Maintenance
Repairs
Disposal of obso-
lete equipment
Modifications and
alterations to the
device
8.2 Storage and shipment
Storage
Shipment and pack-
aging
JX3-BN-EC User Manual
This device is maintenance-free.
Therefore, for the operation of the device no inspection or maintenance are re-
quired.
Defective components could cause dangerous malfunctions and could compro-
mise safety.
Only the manufacturer is allowed to repair the device.
Do not open the device!
The device must be disposed of in accordance with the Environmental Product
Declaration EPD. Applicable local environmental directives and regulations must
be complied with. This product must be disposed of as waste electronic equip-
ment. Waste packaging material must be recycled or reused.
Modifications and alterations to the device and its functions are not allowed. In
the case of modifications to the device, any liability is excluded.
The original parts are specifically designed for the device. Parts and equipment
from other manufacturers must, therefore, not be used.
Any liability for any damages resulting from the use of non-original parts and
equipment is excluded.
When storing the device observe the environmental conditions given in chapter
"Technical specifications".
The device contains electrostatically sensitive components which can be dam-
aged if not handled properly. Damages to the device may impair its reliability.
To protect the device from impact or shock, it must be shipped in its original
packaging, or in an appropriate protective ESD packaging.
In case of damaged packaging inspect the device for any visible damage, and in-
form your freight forwarder and the Jetter AG of the damage caused during ship-
ment. If the device is damaged or has been dropped, it is strictly forbidden to use
it.
Maintenance and repairs | 8
81 / 86