Operating System - Jetter JX3-BN-EC User Manual

Jetter AG

7.3 Operating system

7.3.1 Operating system update via programming tool
JX3-BN-EC User Manual
We are continuously striving to enhance the operating systems of our products.
Enhancing means adding new features, and upgrading existing functions. Cur-
rent OS files are available for download on our homepage in the downloads area
of the respective product.
More information on this subject is available on our website.
Start | Jetter - We automate your success.
With the help of the programming tool JetSym it is possible to update the operat-
ing system in a comfortable way.
Pay attention to the feedback from the
while performing an operating system update.
ü
The latest OS file for the JX3-BN-EC has been downloaded from the Jetter
homepage.
ü
Controller and JetSym are connected.
ü
The JX3-BN-EC has been configured in JetSym.
ü
Controller and JX3-BN-EC are connected.
ü
The JX3-BN-EC waits in the boot loader for the operating system update or
the operating system is running.
1. Make sure that the JX3-BN-EC is not switched off during the operating sys-
tem update.
2. Open programming tool JetSym.
3. Navigate to the Hardware pane.
4. Click on the Hardware node and open the shortcut menu e.g. by pressing the
right mouse button
5. Select Update OS.
ð The dialog box Operating system update opens.
6. Click Select OS File ....
ð The file selection dialog opens.
7. Select the corresponding OS file and click Open.
ð The OS file is displayed in the Operating system update dialog.
8. Click on Update.
ð The OS update is running.
9. Restart the bus node.
ð
The updated operating system is launched.
See also
2 Diagnostics capabilities by means of status indication [} 8]
status display [} 8] of the JX3-BN-EC
Programming | 7
80 / 86