Removing The Expansion Module From The Din Rail; Dismounting The Enclosure From The Backplane Module; Fig. 6 Dismounting Example; Fig. 7 Dismounting Example - Jetter JX3-BN-EC User Manual

Jetter AG

5.2 Removing the expansion module from the DIN rail

5.3 Dismounting the enclosure from the backplane module

JX3-BN-EC User Manual
The release latch lets you remove the device from the DIN rail.
1
Fig. 6: Dismounting example
DIN rail
1
Detail view
A
1. Disconnect the system from the power supply.
2. Remove the device from the mains.
3. Pry the release latch (2) downwards and pull the device off the DIN rail (1).
The upper and lower backplane tab on the module let you pull off the enclosure
from the backplane module.
A
Fig. 7: Dismounting example
DIN rail latch
1
1. Disconnect the system from the power supply.
2. Press the upper and lower latches (1) on the device simultaneously.
3. Keep the latches pressed and pull off the enclosure.
A
DIN rail release latch
2
A
1
Detail view
A
Mechanical installation | 5
A
2
1
14 / 86