Page 1
TORQUE WRENCH MODEL NO: CHT141 PART NO: 1800141 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS GC06/19 iss 5...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE ½” square drive Torque Wrench. This torque wrench is designed to tighten nuts with precision. It should NOT be used for UNDOING nuts, as severe damage could occur. With correct use, this wrench will produce an accuracy of plus or minus 3%, and you can hear and feel when the desired torque setting has been reached.
Page 3
• Do not turn handle below lowest torque setting. • Clean wrench by wiping. Never immerse in any type of cleaning fluid. • The wrench may occasionally require servicing/recalibration in order to ensure accurate readings, in which case, contact your CLARKE dealer. CONVERSION FORMULAE 1kg cm= 13.887 oz/in...