Installing, Connecting, And Testing The Host Adapter - Sun Microsystems LSI22320-SR Installation Manual

1
C H A P T E R
Installing, Connecting, and Testing
the Host Adapter
This chapter describes the Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI host adapter
and explains how to install it into a host, connect it to SCSI storage devices, test the
installation, and boot from a disk drive connected to the host adapter.
Note - If you are unfamiliar with Ultra320 SCSI configuration guidelines, read
"Ultra320 SCSI Configuration" on page 13
chapter.
This chapter discusses the following topics:
"Features" on page 2
■
"Installing the Host Adapter" on page 3
■
"Connecting the Host Adapter" on page 8
■
"Testing the Host Adapter" on page 9
■
"Booting the Host Adapter" on page 11
■
before performing the procedures in this
1