Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Maintenance ............................................................... 8-9
Exploded View ............................................................. 11
Parts List ...................................................................... 12
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron shall not be liable for damages
resulting from misapplication or misuse of its products.
Slug-Buster and Slug-Splitter are registered trademarks of
Greenlee Textron.
Loctite is a registered trademark of Loctite Corporation.
Greenlee Textron / Subsidiary of Textron Inc.
KEEP THIS MANUAL
Description
Greenlee 1904, 1904Pg, 1904PgSB, and 1906SB High
Capacity Ratchet Knockout Driver sets are intended
to punch holes with Greenlee punches and dies. The
recirculating ball screw mechanism reduces by half the
amount of force necessary when compared to
conventional ratchet drivers.
These ratchet drivers can be used with Greenlee
standard or Slug-Buster
round holes, from 1/2" actual size (12.7 mm) through 3"
conduit size (89.8 mm), in plastic, fiberglass, aluminum,
and mild steel. Greenlee Slug-Splitter
dies, available from 0.598" actual size (15.2 mm) though
2" conduit size (61.5 mm), are capable of punching
through all of these materials and stainless steel.
The maximum thickness of material that the punch can
penetrate depends on the size and type of the punch.
Refer to the Capacity Rating chart for individual punch
capacities.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
1904, 1904Pg, 1904PgSB, and 1906SB
High Capacity Ratchet Knockout Drivers
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
®
punches and dies to punch
®
punches and