Fw Scsi Estimated Power Consumption; Monitor Power Specifications - HP 743 Series Technical Reference Manual For Oems

Power Requirements
Power Distribution

FW SCSI Estimated Power Consumption

Table 6-1 summarizes the estimated power consumption of the FW SCSI adapter.
Table 6-1 FW SCSI Power Dissipation
HW Component
SCSI terminators
Total

Monitor Power Specifications

The following section describes the ac power specifications for the 17-inch and 20-inch mon-
itors.
Table 6-2 summarizes the ac power specifications.
Table 6-2 Monitor Power Specifications
Maximum operating (Vac)
Minimum operating (Vac)
Nominal rated (Vac)
Rated line current (Arms)
Frequency range (not-strappable)
6-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
+5 V
Current
(VDD0)
a 213 mA
b 698 mA
a.On-board SCSI terminators; all signals asserted.
b.Actual power demand is greater due to the requirement of supplying SCSI bus TERM
power. This value is limited to 2 A by an on-board fuse. The total power demand could
be as high as 12.43 W.
Voltage Type
+3 V
+12 V
Current
Current
(SYS_VDL)
0 0
1.2 mA 0
60 Hz 50 Hz
132 288
90 198
110 230
2.7 1.5
47 Hz to 63 Hz 47 Hz to 63 Hz
-12 V
P-total
Current
0 1.07 W
0 3.50 W