Model 748 Ruggedized Workstation; Product Description; Supported Configurations - HP 743 Series Technical Reference Manual For Oems

Model 748 Ruggedized Workstation

The sections that follow contain the Model 748 Ruggedized Workstation product description
and the Model 748 Ruggedized Workstation functional description.

Product Description

Hewlett-Packard offers the following HP 9000 products:
• Model 748/132L Ruggedized Workstation
• Model 748/165L Ruggedized Workstation
The 748/132L and 748/165L model incorporates the HP 744/132L and HP 744/165L VME
Board Computers that are based on the PA-RISC 7300LC central processing unit (CPU). All
models provide a variety of interface, graphics, mass storage, and accessory card configura-
tions. Table 1-24 summarizes the features of the Model 748.
Table 1-24 Model 748 Ruggedized Workstation Features
Operating system
System board
Monitors
Mass storage module
VME module
EISA module
PCI module (option)
Power supply

Supported Configurations

This section discusses the following supported configurations: mass storage, monitors, GSC
mezzanine slot, built-in interfaces, EISA module, PCI module, and VME module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Feature
HP-UX
See the feature set for the Model 743 or 744 Board Computer
17 or 19-inch color monitors
72 or 75 Hz refresh rate, multi-mode
Up to four of the following devices:
4 GBor 9GB SE hard disk drive
DDS-1, 2 GB native capacity yielding up to 4 GB w/Data compression.
DDS-2, 4 GB native capacity yielding up to 8 GB w/Data compression.
DDS-3, 12 GB native capacity, up to 24 GB w/Data compression
3.5-inch flexible disk drive
CD-ROM drive
8 VME slots (six slots for VME add-in cards, two for board computer)
4 EISA accessory cards
4 PCI accessory cards (PCI module replaces EISA module)
Two 300 watt power supplies
General Information
Model 748 Ruggedized Workstation
Functionality
1-27