KISANKRAFT KK-SRT-910D User Manual

KISANKRAFT KK-SRT-910D User Manual

Agricultural inter-cultivator
Hide thumbs Also See for KK-SRT-910D:

Advertisement

Quick Links

KisanKraft
Warranty Certificate
®
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction is the result of a defect covered by this warranty. Please
note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty
claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court's jurisdiction.
ChainsawsBrush Cutters and AccessoriesHarvesters
Our
Engines and Water PumpsHand
Cultivators and
AccessoriesSprayers and Accessories
Products
Transplanter and Post Hole Digger
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Limited
(formerly known as KisanKraft Machine Tools P Ltd)
: info@kisankraft.com
: www.kisankraft.com
(K
K
C
)
ISAN
RAFT
OPY
Tools
Garden Tools
Milking
Machines
: +91.80.22178200
Page 88 of 88
KisanKraft
Warranty Certificate
®
Agricultural
Product
Inter-Cultivator
KisanKraft
Brand
 KK-SRT-910D
Model
 KK-SRT-910E
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The
purchaser shall satisfy himself with the product, including any product
demonstration or verification of any function, before buying. KisanKraft Limited or
its authorized dealers, including online sellers, shall not be liable to give any on-site
demonstration after purchase of any of the product.
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Limited
(formerly known as KisanKraft Machine Tools P Ltd)
: info@kisankraft.com
: www.kisankraft.com
(D
C
)
EALER
OPY
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
.
EARLIER
Dealer's Invoice
No.
Dealer's Stamp (
Address, Phone, TIN, etc.):
Dealer's Sign
: +91.80. 22178200
Page 1 of 88

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-SRT-910D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KISANKRAFT KK-SRT-910D

  • Page 1 What is covered: KisanKraft Limited and its manufacturers warrant this product to be KisanKraft Limited or any of its manufacturers has the authority to increase or alter the free from defects in material or workmanship. All parts defective in material and obligations of this warranty.
  • Page 2 Modifications of Warranty: No agent, representative, dealer, or employee of Buyer’s Dealer’s Sign KisanKraft Limited or any of its manufacturers has the authority to increase or alter the Sign obligations of this warranty. What is covered: KisanKraft Limited and its manufacturers warrant this product to be Assignment / Transfer of warranty: The warranty cannot be assigned and shall not free from defects in material or workmanship.
  • Page 3 KK- SRT- 910D / 910E User Manual Wide Range of Products for Every Need KisanKraft Limited (Formerly known as KisanKraft Machine Tools Pvt Ltd) Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA MISSED CALL: 07676065555 For more information give ♦...
  • Page 4: Table Of Contents

    Agricultural Inter-Cultivator ® PRODUCT RANGE KK- SRT- 910D / 910E CONTENTS KisanKraft has a large range of products to serve the farmers. A list of our products is given below: BEFORE GETTING STARTED................... 7 Brush Cutters and Accessories Cultivators and Accessories APPLICATION AND FEATURES ................
  • Page 5 Limit gasket GYR8-7-04 GYR8-7-10 hand wheel accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Washer 12- Split retainer 9 GYR8-7-05 GYR8-7-11 Limited nor any of its manufacturers, nor its authorized dealers assumes any...
  • Page 6 Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer.
  • Page 7: Before Getting Started

    Welded parts of GYR8-5-05 Elastic pin GYR8-5-12 linker Assy Pin shaft B8 x Elastic pin GYR8-5-06 GYR8-5-13 Buy GYR8-5-5 GYR8-5-05 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 82 of 88 Page 7 of 88...
  • Page 8: Safety Instructions

    Oil filling Plug GYR8-4-10 Bolt M10 x 15 GYR8-4-28 Paper gasket (II) GYR8-4-11 BoIt M6 x 20 GYR8-4-29 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 8 of 88 Page 81 of 88...
  • Page 9 Spring cylinder pin 2 (idle) position. Stop the machine immediately GYR8-3-09 x 20 should any emergency occur. Otherwise accidents such as falling down might happen. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 80 of 88...
  • Page 10 Welded parts of a slip or tilt over of the machine, which might lead to GYR8-2-02 pull lever Assy serious damage or accidents. GYR8-2-02 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 10 of 88...
  • Page 11 While operating the machine, the operator must pay attention only on the operation. He must not turn his eyes to other things or let go his hands. Otherwise, accidents might occur. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com...
  • Page 12 Assemble of screw are nearby, serious injury or dropdown might occur. GYR8-04 Nut M8 GYR8-19 locking : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 12 of 88...
  • Page 13 Movable parts position adjusting for SP 5-17 of grid SP 5-37 side cultivation adjusting : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 76 of 88 Page 13 of 88...
  • Page 14 At a turning, the machine must be slowed down and the manual handle must be used. At this time, use of the steering handles is strictly forbidden. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com...
  • Page 15: Parts Description

    Welded parts of right Washer 8- G/B15-02 G/B15-05 fender Plain Bolt M8 x 16 G/B15-03 2. Unit of Banking Machine : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 74 of 88 Page 15 of 88...
  • Page 16: Plain

    G/B10-13 seat Bolt M6 x 20 G/B10-07 Screw M6 x 10 G/B10-14 11. Unit of Handle for Right Turning : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 16 of 88 Page 73 of 88...
  • Page 17: Plain

    Unit of control panel Washer 12- G/B9-07 G/B9-15 for operation Plain Hexagram bolt M6 X G/B9-08 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 72 of 88 Page 17 of 88...
  • Page 18: Plain

    G/B8-15 Washer 6-Spring G/B8-31 operation lever Sheath of handle G/B8-16 Nut M6 G/B8-32 Welded parts of G/B8-17 case : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 18 of 88 Page 71 of 88...
  • Page 19: Functions Of Different Units

    “Low” position before shutting down the engine. It might be set at any position as required when the machine in operation. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com...
  • Page 20 G/B7-121 gear in auxiliary shift Active chain wheel G/B7-114 Turning shift disk G/B7-122 Washer G/B7-115 Bearing 6207 G/B7-123 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 20 of 88 Page 69 of 88...
  • Page 21 Shaft sleeve G/B7-104 gear in auxiliary shift Steel ball 5.5 2 G/B7-96 Washer G/B7-105 shaft G/B7-97 Shaft sleeve G/B7-106 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 68 of 88 Page 21 of 88...
  • Page 22 G/B7-82 fork Welded parts of shift fork for 3 and 5 G/B7-69 Bearing 6204 G/B7-83 shift fork : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 22 of 88 Page 67 of 88...
  • Page 23 G/B7-44 Washer-Spring G/B7-58 Welded parts of (oil discharge) G/B7-45 G/B7-59 fitting lock for flexible bolt M8 x 12 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 66 of 88 Page 23 of 88...
  • Page 24: Right Operation & Use

    Check the wires or cables for any damaged insulation loose connection. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 24 of 88...
  • Page 25: Plain

    Bolt M8 x 30 G/B7-24 gearbox Otherwise it might deteriorate the mechanical performance and cause malfunction. It is necessary to discharge the waste oil periodically and refill with new oil. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 26 G/B6-01 G/B6-06 and connecting pin pulling arm Stop Welded parts of hanging G/B6-02 Ring/Retainer G/B6-07 and connecting frame : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 26 of 88 Page 63 of 88...
  • Page 27: Method Of Starting & Shutting Down The Engine

    After that, try starting again. Starting In Cold Weather: If the engine is difficult to start in cold weather, try and help the starting with the following method. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 28: Plain

    Hexangular bolt  Washer 6-Spring G/B3-03 G/B3-06 Put the fuel on/off switch to the M8 x 16 “off” position. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 28 of 88 Page 61 of 88...
  • Page 29: Methods Of Advance, Turning, Speed Change & Stopping

    G/B1- G/B1-04 backward). shaft (1) of rocker Welded parts of limit Subassembly G/B1- G/B1-05 shaft(2) of pulley cover : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 60 of 88 Page 29 of 88...
  • Page 30 When the machine is put on a running truck, it must be securely bound with a strong rope. Its wheels must be stopped with wedges to prevent it from moving. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 31: Correct Operation

    Governor Push Pull Bolt E13-08 E13-17 Reel High Speed Limit E13-09 Fork E13-18 Screw : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 58 of 88 Page 31 of 88...
  • Page 32 Volt-adjusting Washer E12-08 Pump E12-00 muffler when operating the main Assembly speed change lever. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 32 of 88 Page 57 of 88...
  • Page 33: Correct Assembly And Use

    E11-23 be guarded with a cover Nut M6 E11-12 Note: If the PTO shaft is not used, it must be well greased and protected with a cover. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 34: Plain

    Engine Oil Pump Unit E10-05 Bolt M6 x 4 E10-11 Drive Gear of Lube Oil E10-06 Pump : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 34 of 88 Page 55 of 88...
  • Page 35: Technical Specifications

    Weight of the Machine 110 kg Fuel Injection Mandrill E8-05 E8-00 Valve Assembly Consumption/Out Put Capacity 750 ml/hour (Engine) : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 54 of 88 Page 35 of 88...
  • Page 36: Maintenance

    The pivoting points of the steering levers and the operation levers, and the adjusting point of the flexible wire adjuster : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 37: Plain

    E5-18 Gear Starting Ratchet Key 8 x 40 E5-09 E5-19 Reel Crankshaft E5-10 Bolt M6 x 12 E5-20 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 52 of 88 Page 37 of 88...
  • Page 38: Engine -Diesel(Vertical)

    Note: Make sure at the time of assembly that the fuel filter has a rubber pad at its bottom. Cleaning and replacement of the air filters : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 39 Pull out the starter lever repeatedly until you can hear the creaking sound of compressing and fuel spraying. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...
  • Page 40 Exhaust Valve Rocker Arm Seat E2-06 21-1 Seat Assembly Intake Valve Rocker Stud AM8 x 20 E2-07 E2-22 : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 40 of 88 Page 49 of 88...
  • Page 41: Plain

    In a natural state (i.e. without taking hold the steering handle), the clearance should be 1-3mm (dimension Note: After adjusting the steering clutch, you must confirm that it works properly and reliably. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com...
  • Page 42: Parts Diagram & Parts List

    “disengagement” position and check if the intercultivator stops rotating : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 42 of 88...
  • Page 43 Align the attachments with the line in operations. Is the vibration caused by the machine. Tighten their bolts and attachments? nuts. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com Page 46 of 88...
  • Page 44 This will help to prolong the service life of the machine. Keep the machine at a dry battery. place. : info@kisankraft.com : +91.80. 22178200 : info@kisankraft.com : +91.80. 22178200 : www.kisankraft.com : www.kisankraft.com...

This manual is also suitable for:

Kk-srt-910e

Table of Contents