KISANKRAFT KK-SRT-910D Operation Manual

Intercultivator
Hide thumbs Also See for KK-SRT-910D:

Advertisement

Quick Links

KisanKraft
Intercultivator
Product
KisanKraft
Brand
 KK-SRT-910D
Model
 KK-SRT-910E
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
Warranty Certificate
TM
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER
Dealer's Invoice
No.
Dealer's Stamp (
Dealer's Sign
: info@kisankraft.com
(D
C
)
EALER
OPY
TM
TM
.
Address, Phone, TIN, etc.):
: +91.80. 22178200
Page 1 of 88

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-SRT-910D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KISANKRAFT KK-SRT-910D

  • Page 1 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 2 Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 3 KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E Operation Manual KisanKraft Machine Tools Pvt. Ltd. Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA ♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦...
  • Page 4: Table Of Contents

    METHODS OF ADVANCE, TURNING, SPEED CHANGE & STOPPING: ......29 CORRECT OPERATION: ..................31 CORRECT ASSEMBLY AND USE................33 TECHNICAL SPECIFICATIONS ................35 MAINTENANCE ....................36 TROUBLESHOOTING ....................46 PARTS DIAGRAM & PARTS LIST ................47 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 4 of 88...
  • Page 5 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 6 Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 7: Before Getting Started

    You will be able to use the machine to the best if you are familiar with the  instructions in this manual and operate the machine correctly. NOTE: THIS MACHINE IS MEANT ONLY FOR SOFT SOIL USE. STRICTLY PROHIBITED FOR HARD SOIL. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 7 of 88...
  • Page 8: Safety Instructions

    Ploughshares that do not match must not be assembled on this machine, even after modification. Otherwise it might lead to faults, accidents or even deaths. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 8 of 88...
  • Page 9 Operation of the steering handles and main clutch control lever must not be put in the “neutral” (idle) position. Stop the machine immediately should any emergency occur. Otherwise accidents such as falling down might happen. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 9 of 88...
  • Page 10 Otherwise there might be a slip or tilt over of the machine, which might lead to serious damage or accidents. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 10 of 88...
  • Page 11 While operating the machine, the operator must pay attention only on the operation. He must not turn his eyes to other things or let go his hands. Otherwise, accidents might occur. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 11 of 88...
  • Page 12 Particularly, when the machine is working by a river, a ditch or a cliff or some people are nearby, serious injury or dropdown might occur. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 12 of 88...
  • Page 13 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 13 of 88...
  • Page 14 At a turning, the machine must be slowed down and the manual handle must be used. At this time, use of the steering handles is strictly forbidden. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 14 of 88...
  • Page 15: Parts Description

    KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E PARTS DESCRIPTION Front Side: : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 15 of 88...
  • Page 16 KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E Rear Side: : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 16 of 88...
  • Page 17 KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E Positions of Safety Reminders: : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 17 of 88...
  • Page 18 KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 18 of 88...
  • Page 19: Functions Of Different Units

    “Low” position before shutting down the engine. It might be set at any position as required when the machine in operation. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 19 of 88...
  • Page 20 4. Pressure Reducing Control Lever This lever can be used at the time of starting when the battery is low and it is difficult to start the engine. Function of the Driving Unit : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 20 of 88...
  • Page 21 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 21 of 88...
  • Page 22 Intercultivator 2. Backward High-Speed Limiter This limiter should be put to the “On” position to control the backing speed when the handle is pushed to the “reverse” direction. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 22 of 88...
  • Page 23 2. Lockup Lever For Up And Down Fine Adjustment of the Handle: It serves to adjust the height of the handle when the handle is fixed : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 23 of 88...
  • Page 24: Right Operation & Use

    Check muffler other overheated units to see if there is any dirt or dust. Check the wires or cables for any damaged insulation loose connection. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 24 of 88...
  • Page 25 The mobile oil in the engine and the gear oil in the gearbox cannot be used permanently. Otherwise it might deteriorate the mechanical performance and cause malfunction. It is necessary to discharge the waste oil periodically and refill with new oil. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200...
  • Page 26 Replacement: Remove the oil discharge plug at the bottom of the gearbox so that all the waste oil flows out. Then refill until the oil overflows from the oil check screw as shown below: : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200...
  • Page 27: Method Of Starting & Shutting Down The Engine

    After that, try starting again. Starting In Cold Weather: If the engine is difficult to start in cold weather, try and help the starting with the following method. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 27 of 88...
  • Page 28 Set the throttle control lever to the “low” position. Put the electric starter switch to  the “off” position to shut off the engine. Put the fuel on/off switch to the  “off” position. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 28 of 88...
  • Page 29: Methods Of Advance, Turning, Speed Change & Stopping

    “disengaged” position.  Set the main speed change lever to the desired step. Put the main clutch control lever  to the “engaged” position and start going forward backward). : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 29 of 88...
  • Page 30 When the machine is put on a running truck, it must be securely bound with a strong rope. Its wheels must be stopped with wedges to prevent it from moving. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 30 of 88...
  • Page 31: Correct Operation

    The lockup is achieved by means of a saucer washer located in a slot seat and an eccentric shaft. So, just press down the lockup lever of the handle and you can fix it : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 31 of 88...
  • Page 32 30 degrees.  While using the handle in the reverse direction, take care not to touch the muffler when operating the main speed change lever. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 32 of 88...
  • Page 33: Correct Assembly And Use

    For the sake of safety , it must be guarded with a cover Note: If the PTO shaft is not used, it must be well greased and protected with a cover. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200...
  • Page 34 If not so, the machine might turn over or other unexpected accidents might occur. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 34 of 88...
  • Page 35: Technical Specifications

    Oil (Mixing) Transmission - 1000 ml (90 Grade) & Engine Oil should be changed for every 10 Hrs Weight of the Machine 150 kg Consumption/Out Put Capacity 750 ml/hour (Engine) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 35 of 88...
  • Page 36: Maintenance

    The pivoting points of the steering levers and the operation levers, and the adjusting point of the flexible wire adjuster : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 36 of 88...
  • Page 37 Overused lubricating oil might deteriorate the mechanical performance of the machine. It also frequently causes faults. The waste oil must be periodically replaced with new oil of the specified quantity. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 37 of 88...
  • Page 38  described above. Note: Make sure at the time of assembly that the fuel filter has a rubber pad at its bottom. Cleaning and replacement of the air filters : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 38 of 88...
  • Page 39 Pull out the starter lever repeatedly until you can hear the creaking sound of compressing and fuel spraying. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 39 of 88...
  • Page 40 Press the pressure-reducing lever directly with one hand and take hold of the high pressure pipe with the other, to see if there is the sound of spraying. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 40 of 88...
  • Page 41 In a natural state (i.e. without taking hold the steering handle), the clearance should be 1-3mm (dimension Note: After adjusting the steering clutch, you must confirm that it works properly and reliably. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 41 of 88...
  • Page 42 “disengagement” position and check if the intercultivator stops rotating : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 42 of 88...
  • Page 43 If the pressure settings in the right and left tires are not equal, it would be very difficult to control the handle and drive in a straight line in operations. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 43 of 88...
  • Page 44 If the machine is not used for a long period of time, it is advisable to recharge the  battery at least once a month. This will help to prolong the service life of the battery. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 44 of 88...
  • Page 45 This can prevent moisture from getting into the engine and causing rust. Take care to prevent mud or other  contaminants from getting machine. Keep the machine at a dry place. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 45 of 88...
  • Page 46: Troubleshooting

    Does the handle vibrate? Tighten the bolts on the handle. vibration Align the attachments with the Is the vibration caused by the machine. Tighten their bolts and attachments? nuts. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 46 of 88...
  • Page 47: Parts Diagram & Parts List

    KisanKraft INTERCULTIVATOR KK- SRT- 910D / 910E PARTS DIAGRAM & PARTS LIST 1. Cylinder Block Assembly : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 47 of 88...
  • Page 48: Www.kisankraft.com

    E1-18 Crankcase Cover E1-40 Needle Bearing E1-19 Plunger E1-41 HK1512 Thrust Plate E1-20 Oil Conduit E1-42 Bolt M8 x 12 E1-21 Pin 8 x 12 E1-43 Bearing 6308 E1-22 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 48 of 88...
  • Page 49: Www.kisankraft.com

    20-1 Seat Rocker Arm Seat Inlet Valve Seat E2-05 E2-21 Assembly. Exhaust Valve Rocker Arm Seat E2-06 21-1 Seat Assembly Intake Valve Rocker Stud AM8 x 20 E2-07 E2-22 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 49 of 88...
  • Page 50: Www.kisankraft.com

    27-1 Stud AM6 x 55 Clip Valve Adjusting E2-16 Stud AM6 x 75 E2-28 Cushion Valve Clearance E2-17 Bolt AM6 x 25 E2-29 Adjusting Screw 3. Cylinder Head Assembly : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 50 of 88...
  • Page 51: Www.kisankraft.com

    E4-06 E4-02 Connecting Rod Block E4-07 Piston Rings Set Connecting Rod Shaft E4-03 E4-08 Bushing Connecting Rod Piston E4-04 E4-09 Cover Piston Connecting Rod Bolt E4-10 Piston Pin E4-05 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 51 of 88...
  • Page 52: Www.kisankraft.com

    Output End Washer E5-07 E5-17 Washer Crankshaft Timing E5-08 Flywheel Nut E5-18 Gear Starting Ratchet Key 8 x 40 E5-09 E5-19 Reel Crankshaft E5-10 Bolt M6 x 12 E5-20 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 52 of 88...
  • Page 53: Www.kisankraft.com

    Sl No Part Name Part No Valve Push Rod Assembly. E6-01 Key 5 x 14 E6-04 Valve Tappet E6-02 Camshaft E6-05 Camshaft Timing Gear E6-03 7. Air Intake System : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 53 of 88...
  • Page 54: Www.kisankraft.com

    Block Pin 3 x 5 E8-02 Locating Pin E8-07 Fuel Injection Volt-adjustment Washer E8-03 E8-08 Nozzle Nozzle Forcing Volt-adjustment Spring E8-04 E8-09 Fuel Injection Mandrill E8-05 E8-00 Valve Assembly : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 54 of 88...
  • Page 55: Www.kisankraft.com

    O-Ring 5 x 2.4 E10-09 Lube Oil Filter Pin 3x16 E10-04 E10-10 Assembly. Engine Oil Pump Unit E10-05 Bolt M6 x 4 E10-11 Drive Gear of Lube Oil E10-06 Pump : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 55 of 88...
  • Page 56: Www.kisankraft.com

    Bolt M12 x 1.25 x 14 E11-09 Fuel Filler Screen E11-21 Fuel Tank Lower E11-10 Fuel Tank Cap E11-22 Support Nut M6 x 14 E11-11 Cushion E11-23 Nut M6 E11-12 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 56 of 88...
  • Page 57: Www.kisankraft.com

    Block Intake Oil Pipe E12-06 Plunger Spring E12-14 Outtake Oil Pipe Spring Holder E12-15 FIP Block Plunger E12-07 Tappet E12-16 Assembly Fuel Injection Volt-adjusting Washer E12-08 Pump E12-00 Assembly : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 57 of 88...
  • Page 58: Www.kisankraft.com

    Lever Shaft Oil Bolt M6 x 18 E13-06 E13-15 Seal Nut M6 E13-07 Lever Shaft E13-16 Governor Push Pull Bolt E13-08 E13-17 Reel High Speed Limit E13-09 Fork E13-18 Screw : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 58 of 88...
  • Page 59: Www.kisankraft.com

    Starter Ratchet Reel E14-04 10-1 Assembly Return Spring E14-05 Bolt M6 x 10 E14-11 Torsion spring Starter Rope E14-12 Compression Spring E14-06 Starter Handle E14-13 Ratchet E14-07 17. Fan Cover Assembly : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 59 of 88...
  • Page 60: Www.kisankraft.com

    G/B1- G/B1-03 pulley cover perimeter 1067) Welded parts of limit Welded parts G/B1- G/B1-04 shaft (1) of rocker Welded parts of limit Subassembly G/B1- G/B1-05 shaft(2) of pulley cover : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 60 of 88...
  • Page 61: Www.kisankraft.com

    Hexangular bolt Hexangular nut G/B3-01 G/B3-04 M8 x 85 Welded parts of Long Hexangular G/B3-02 G/B3-05 supporting shaft nut M8 Hexangular bolt Washer 6-Spring G/B3-03 G/B3-06 M8 x 16 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 61 of 88...
  • Page 62: Www.kisankraft.com

    12 connecting Bolt M12x60 G/B4-07 Washer 12-Spring G/B4-17 Washer 12-Spring G/B4-08 Bolt M12 x 25 G/B4-18 Insulation Clip G/B4-09 Bolt M10 x 20 G/B4-19 Subassembly of G/B4-10 machine frame : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 62 of 88...
  • Page 63: Www.kisankraft.com

    Part Name Part No Welded parts of hanging Welded parts of G/B6-01 G/B6-06 and connecting pin pulling arm Stop Welded parts of hanging G/B6-02 Ring/Retainer G/B6-07 and connecting frame : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 63 of 88...
  • Page 64: Www.kisankraft.com

    Left cover of prevent G/B7-04 G/B7-22 sleeve from earth and water Washer 8-Plain G/B7-05 Bolt M8 x 45 G/B7-23 Left body of G/B7-06 Bolt M8 x 30 G/B7-24 gearbox : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 64 of 88...
  • Page 65: Www.kisankraft.com

    Washer 12-Star G/B7-15 Pin shaft G/B7-33 Fixed shaft of G/B7-16 Split pin 2.5 x 20 G/B7-34 tension wheel Bolt M6 x 16 G/B7-17 Spring G/B7-35 Fixed Piece G/B7-18 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 65 of 88...
  • Page 66: Www.kisankraft.com

    Bolt M12 x 60 G/B7-43 Nut M8 G/B7-57 Fixed Plate of chain G/B7-44 Washer-Spring G/B7-58 Welded parts of (oil discharge) G/B7-45 G/B7-59 fitting lock for flexible bolt M8 x 12 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 66 of 88...
  • Page 67: Www.kisankraft.com

    Key B5 x 30 G/B7-81 rubber oil seal Fitting spring for shift G/B7-68 shaft G/B7-82 fork Welded parts of shift fork for 3 and 5 G/B7-69 Bearing 6204 G/B7-83 shift fork : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 67 of 88...
  • Page 68: Www.kisankraft.com

    Assemble of shift Washer G/B7-94 G/B7-103 fork Active gear of quick G/B7-95 Shaft sleeve G/B7-104 gear in auxiliary shift Steel ball 5.5 2 G/B7-96 Washer G/B7-105 shaft G/B7-97 Shaft sleeve G/B7-106 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 68 of 88...
  • Page 69: Www.kisankraft.com

    4th shaft G/B7-112 Semi-shaft G/B7-120 Passive gear of slow G/B7-113 Turning spring G/B7-121 gear in auxiliary shift Active chain wheel G/B7-114 Turning shift disk G/B7-122 Washer G/B7-115 Bearing 6207 G/B7-123 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 69 of 88...
  • Page 70: Www.kisankraft.com

    Part No Assemble of 19.05 Assemble of agricultural G/B7-116 bone rubber oil G/B7-124 reinforced chain seal Assemble of Passive gear G/B7-117 G/B7-125 ferrule 8. Unit of Housing Returning Apparatus : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 70 of 88...
  • Page 71: Www.kisankraft.com

    Buffer sheath Q10 x Hexagram Bolt G/B8-14 G/B8-30 M6 x 15 Welded parts of G/B8-15 Washer 6-Spring G/B8-31 operation lever Sheath of handle G/B8-16 Nut M6 G/B8-32 Welded parts of G/B8-17 case : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 71 of 88...
  • Page 72: Www.kisankraft.com

    Welded parts of Washer 12- control handle lever G/B9-06 G/B9-14 Spring for rotary cultivation Unit of control panel Washer 12- G/B9-07 G/B9-15 for operation Plain Hexagram bolt M6 X G/B9-08 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 72 of 88...
  • Page 73: Www.kisankraft.com

    Assemble of Press cover for left fixed G/B10-06 Press cover G/B10-13 seat Bolt M6 x 20 G/B10-07 Screw M6 x 10 G/B10-14 11. Unit of Handle for Right Turning : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 73 of 88...
  • Page 74: Www.kisankraft.com

    Welded parts of left Washer 8- G/B15-01 G/B15-04 fender Spring Welded parts of right Washer 8- G/B15-02 G/B15-05 fender Plain Bolt M8 x 16 G/B15-03 2. Unit of Banking Machine : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 74 of 88...
  • Page 75: Www.kisankraft.com

    Washer 6 BM 2-10 Split pin 2 x 18 BM 2-21 Welded parts of Butterfly nut M6 BM 2-11 BM 2-22 adjusting screw 5. Unit of Plough with Grid : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 75 of 88...
  • Page 76: Www.kisankraft.com

    Press torsion spring SP 5-16 of left grid SP 5-36 adjusting arm welded parts of Movable parts position adjusting for SP 5-17 of grid SP 5-37 side cultivation adjusting : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 76 of 88...
  • Page 77: Www.kisankraft.com

    GYR8-16 WheeI cultivation tractor Bolt M10 x 85 GYR8-02 Spring GYR8-17 Bolt M 8 x Washer 10 GYR8-03 GYR8-18 Assemble of screw GYR8-04 Nut M8 GYR8-19 locking : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 77 of 88...
  • Page 78: Www.kisankraft.com

    Assemble of screw Shaft pin GYR8-14 GYR8-29 locking (III) B10 x 45 Assemble of screw GYR8-15 locking (II) 8-1 Assemble Parts of Knife for Left and Right Rotary Cultivation : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 78 of 88...
  • Page 79: Www.kisankraft.com

    Part No Sl No Part Name Part No Cable Sub Gyro GYR8-2-01 Washer 6 GYR8-2-05 Tiller Split pin 2 x GYR8-2-02 GYR8-2-06 Welded parts of GYR8-2-02 pull lever Assy GYR8-2-02 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 79 of 88...
  • Page 80: Www.kisankraft.com

    Welded parts of right GYR8-3-07 Limit plate GYR8-3-16 movable main-plate Welded parts of left Press plate ( GYR8-3-08 GYR8-3-17 movable sub-plate Spring cylinder pin 2 GYR8-3-09 x 20 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 80 of 88...
  • Page 81: Www.kisankraft.com

    GYR8-4-08 plough knife GYR8-4-26 shaft Bearing stand GYR8-4-09 Bearing 6206 GYR8-4-27 Oil filling Plug GYR8-4-10 Bolt M10 x 15 GYR8-4-28 Paper gasket (II) GYR8-4-11 BoIt M6 x 20 GYR8-4-29 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 81 of 88...
  • Page 82: Www.kisankraft.com

    Screw M6 x 12 GYR8-5-04 Buy GYR8-5-5 GYR8-5-5 Welded parts of GYR8-5-05 Elastic pin GYR8-5-12 linker Assy Pin shaft B8 x Elastic pin GYR8-5-06 GYR8-5-13 Buy GYR8-5-5 GYR8-5-05 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 82 of 88...
  • Page 83: Www.kisankraft.com

    GYR8-6-04 GYR8-6-11 wheel support crank Welded parts of GYR8-6-05 Washer 10 GYR8-6-12 screw Bolt M10 x Washer 12 GYR8-6-06 GYR8-6-13 1.25 x 70 Welded parts of GYR8-6-07 outer sheath : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 83 of 88...
  • Page 84: Www.kisankraft.com

    GYR8-7-03 GYR8-7-09 wheel Assembly of Limit gasket GYR8-7-04 GYR8-7-10 hand wheel Washer 12- Split retainer 9 GYR8-7-05 GYR8-7-11 Spring Welded parts of Washer 12- GYR8-7-06 GYR8-7-12 outer cover Plain : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 84 of 88...
  • Page 85: Www.kisankraft.com

    KisanKraft PRODUCT RANGE KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel Backpack Brush Cutter Sprayers and Accessories...
  • Page 86: Www.kisankraft.com

    KisanKraft Wide Range of Products for Every Need MISSED CALL: 07676065555 For more information give Many of our products have BIS: ISI certification. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 86 of 88...
  • Page 87: Www.kisankraft.com

    KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 88 Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer.

This manual is also suitable for:

Kk-srt-910e

Table of Contents