KISANKRAFT KK-IC-8626 Operation Manual

Inter cultivator
Hide thumbs Also See for KK-IC-8626:

Advertisement

Quick Links

KisanKraft
Intercultivator
Product
KisanKraft
Brand
Model
KK-IC-8626
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
Warranty Certificate
TM
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER
Dealer's
Invoice No.
Dealer's Stamp (
Dealer's Sign
: info@kisankraft.com
(D
C
)
EALER
OPY
TM
TM
.
Address, Phone, TIN, etc.):
: +91.80. 22178200
Page 1 of 48

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-IC-8626 and is the answer not in the manual?

Questions and answers

Summary of Contents for KISANKRAFT KK-IC-8626

  • Page 1 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 2 Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 3 KisanKraft INTERCULTIVATOR KK-IC-8626 Operation Manual KisanKraft Machine Tools Pvt. Ltd. Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA ♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦ ♦ Ernakulam ♦ Guwahati ♦ Patna ♦ Hinudpur ♦ Hubli ♦ Hyderabad ♦...
  • Page 4 KisanKraft INTERCULTIVATOR KK-IC-8626 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 4 of 48...
  • Page 5: Table Of Contents

    KisanKraft INTERCULTIVATOR KK-IC-8626 CONTENTS BEFORE GETTING STARTED ............... 8 SAFETY INSTRUCTIONS................8 ASSEMBLY INSTRUCTIONS ..............10 STARTING INSTRUCTIONS ............... 15 TILLING ....................18 CULTIVATING ..................18 MAINTENANCE ..................20 STORAGE....................23 TECHNICAL SPECIFICATIONS ..............24 TROUBLESHOOTING ................25 PARTS DIAGRAM-TILLER/CULTIVATOR ASSEMBLY ........26 PARTS LIST-TILLER/CULTIVATOR ASSEMBLY ..........
  • Page 6 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 7 Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 8: Before Getting Started

    KisanKraft INTERCULTIVATOR KK-IC-8626 BEFORE GETTING STARTED We wish to thank you for choosing our product. We are confident that the high quality of our product will meet your requirement and will give you long-lasting service. The Tiller/Cultivator tills and weeds precisely “to handle” your most difficult jobs. It handles smoothly while the tines churn soil to ten inches deep.
  • Page 9 KisanKraft INTERCULTIVATOR KK-IC-8626 While working, always wear substantial footwear and long trousers. Do not  operate the equipment with barefoot or wearing open sandals. Always wear ear and eye protection. Eye protection must meet ANSI Z 87.1. To  avoid hearing damage, we recommend hearing protection be worn whenever using the equipment.
  • Page 10: Assembly Instructions

    KisanKraft INTERCULTIVATOR KK-IC-8626 Always pull starter cord slowly until resistance is felt. Then pull cord rapidly to  avoid kickback and prevent arm or hand injury. Stop the engine whenever you leave the machine. Allow the engine to cool before storing in any enclosure.
  • Page 11 KisanKraft INTERCULTIVATOR KK-IC-8626 Key No Description Key No Description Engine Middle Handle Axle Assembly Cap screw Wheel Assembly Right Handle Bracket Assembly Throttle Cable Fender Guard Assembly Throttle Lever Blade Bet aiming Pin Left Handle Blade Knob Handle Cover, Vent-pipe...
  • Page 12 KisanKraft INTERCULTIVATOR KK-IC-8626 Place two wheel Assembly onto Remove the axle assembly from the axle Assembly. Please notice the Tiller/Cultivator direction wheel Assembly Fix up the wheel Assembly using Attach the wheel cup to the wheel a washer and a screw. Repeat on Assembly.
  • Page 13 KisanKraft INTERCULTIVATOR KK-IC-8626 How to Assemble Handles: Attach the middle handle to the Attach the left handle and right lower handle using the knobs and handle to the middle handle using bolts provided. The knobs should the knobs and bolts provided. The be on the outside.
  • Page 14 KisanKraft INTERCULTIVATOR KK-IC-8626 Remember Always mix two-cycle oil with gasoline before fueling your Tiller/Cultivator. Never,  ever run your Tiller/Cultivator on gasoline alone. This will ruin your engine and void all warranties. Always use a clean gas can and unleaded gas.
  • Page 15: Starting Instructions

    KisanKraft INTERCULTIVATOR KK-IC-8626 STARTING INSTRUCTIONS Starting Your Tiller/Cultivator for the First Time Cold Engine) Fill the fuel tank with the proper oil/gasoline mixture. (See previous section.) Hand tighten the gasoline cap just until its snug. Move run/stop lever into the “run”...
  • Page 16 KisanKraft INTERCULTIVATOR KK-IC-8626 Move the choke lever to the Close (Choke)position Then pull the starter cord again. The engine should start and run. Let the engine warm up two to three minutes before using. Follow the above steps whenever you are starting the engine “cold”, or when the engine has run dry and you have just added fuel.
  • Page 17 KisanKraft INTERCULTIVATOR KK-IC-8626 WARNING: If the engine does not stop when switch is set to the stop position, release the throttle. Allow engine to idle. Put the tiller/cultivator down, and pull the choke button out to cold start (closed) position. Check and return ignition switch to ON position before starting the engine again.
  • Page 18: Tilling

    KisanKraft INTERCULTIVATOR KK-IC-8626 IMPORTANT NOTE: Never use starting fluids. Starting fluids will cause permanent engine damage. Using them will void the warranty. TILLING If you’ve seen other Tiller/Cultivators, your Tiller/Cultivator may surprise you. It tills best when you pull it backward! When you pull your Tiller/Cultivator backward, you give extra resistance to the tines, so they dig deeper.
  • Page 19 KisanKraft INTERCULTIVATOR KK-IC-8626 WARNING:  If your tines get jammed or entangled, shut off the engine at once.  Remove the obstruction while the engine is off.  Never try to remove an obstruction while the engine is running. Serious injury can result.
  • Page 20: Maintenance

    KisanKraft INTERCULTIVATOR KK-IC-8626 MAINTENANCE How to Check, Clean and Change the Air Filter: Check the air filter every 25 hours of use or more frequently if used under dusty conditions. A clogged air filter may increase fuel consumption while cutting down the engine power.
  • Page 21 KisanKraft INTERCULTIVATOR KK-IC-8626 When checking the machine to make sure that it is okay before using it, check  the area around the muffler and remove any debris. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire.
  • Page 22 KisanKraft INTERCULTIVATOR KK-IC-8626 Every Every Every System/ Before Procedure Note Component Hours Hours Hours Air Cooling Vent Muffler, Spark Arrester, Clean  Cylinder Exhaust Port IMPORTANT: Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.
  • Page 23: Storage

    KisanKraft INTERCULTIVATOR KK-IC-8626 STORAGE Take the following measures before storing your Tiller/Cultivator for a long period: Do not store your Tiller/Cultivator with fuel still in it. Even under ideal conditions, stored fuel containing ethanol or MTBE can start to go stale in 30 days. And, since stale fuel has a high gum content, it can clog the carburetor, this, in turn, will restrict fuel flow.
  • Page 24: Technical Specifications

    KisanKraft INTERCULTIVATOR KK-IC-8626 TECHNICAL SPECIFICATIONS Product Code KK-IC-8626 1.5kW(2 hp) 42 cc Engine Type 2- stroke RPM/Out Put Pressure 7000 (Engine RPM) & 250 (Rotavator RPM) Fuel Used Petrol Fuel Tank Capacity 1.2 L Oil (Mixing) 40ml (2T) oil per 1 Liter of Petrol...
  • Page 25: Troubleshooting

    KisanKraft INTERCULTIVATOR KK-IC-8626 TROUBLESHOOTING Case 1. Starting failure Check Probable Causes Action to be taken Drain it and fill the tank with Fuel Tank Incorrect fuel correct fuel Fuel Filter Fuel filter is clogged Clean the fuel filter. Carburetor Adjustment...
  • Page 26: Parts Diagram-Tiller/Cultivator Assembly

    KisanKraft INTERCULTIVATOR KK-IC-8626 PARTS DIAGRAM-TILLER/CULTIVATOR ASSEMBLY : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 26 of 48...
  • Page 27: Parts List-Tiller/Cultivator Assembly

    KisanKraft INTERCULTIVATOR KK-IC-8626 PARTS LIST-TILLER/CULTIVATOR ASSEMBLY Part No Part Name Part No Part Name Handle Grip Washer-Worm Shaft Throttle Lever Bearing 6002 E Ring 3.5 Worm Thrust Bearing 51202 Washer 5-Plain Worm Shaft Throttle Bracket Screw M6x18-Hex Screw ST4.8x19 Left Gear Housing Switch On/Off Oil Seal 18.9x30x5...
  • Page 28: Parts Diagram-Engine Assembly

    KisanKraft INTERCULTIVATOR KK-IC-8626 PARTS DIAGRAM-ENGINE ASSEMBLY : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 28 of 48...
  • Page 29: Parts List-Engine Assembly

    KisanKraft INTERCULTIVATOR KK-IC-8626 PARTS LIST-ENGINE ASSEMBLY Part No. Part Name Part No Part Name Screw-Rope Reel Cylinder Washer-Rope Reel Screw M5x20-Allen Rope Reel Guide Cover Assy Starter Rope Spark Plug Recoil Spring Spring-Spark Plug Starter Cover Dust Cover-Spark Plug Starter Handle...
  • Page 30 KisanKraft INTERCULTIVATOR KK-IC-8626 Part No. Part Name Part No Part Name Fan Cover Screw M5x25-Hex Clip Needle Bearing-Piston Pin Circlip-Piston Pin Stand-Fuel Tank Piston Screw M5x30-Hex Piston Pin Out Let-Muffler Screw M5x12-Star Pipe Clip Piston Ring Buy #89 Fuel Tank Lid Gasket-Cylinder : www.kisankraft.com...
  • Page 31: Stroke Petrol Engine- Manual

    Do not operate the engine with the muffler or air cleaner cover removed. (Inspect particularly the muffler at regular intervals for loose mounting screws, breakage or leakage, and repair or replace it if any abnormality is observed.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200...
  • Page 32 Although sufficient care has been taken to assure the safety of the engine, operators or service personnel must observe necessary precautions to operate it safely and protect themselves from possible dangers. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 32 of 48...
  • Page 33 Revolution speed could rise unexpectedly when the external wire of throttle wire  comes off from the position. NO PLAY Driven equipment may fail to stop even if the throttle lever is returned.  : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 33 of 48...
  • Page 34 KisanKraft 2-STROKE PETROL ENGINE Throttle wire adjust screw Lock nut Play (As much as the external wire can move lightly) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 34 of 48...
  • Page 35 CAUTION Cracks, fissures or disconnection from joints could cause fire or explosion by leaked fuel. Service or replace damaged fuel pipe and grommet. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 35 of 48...
  • Page 36 (at the If only exploding sounds are heard, but it does not start, return the choke lever to the fully closed position and pull the starter grip vigorously once again. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 36 of 48...
  • Page 37 When the engine fails to start after trying recoil operation for 7 to 8 times. Return the starter lever to the operating position and try the recoil operation. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 37 of 48...
  • Page 38 If the decompression slot of cylinder is clogged, the engine may start slower than  normal. Clean the slot to restore the normal condition. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 38 of 48...
  • Page 39 Do not touch the engine body, especially  the muffler, during or immediately after stopping the operation. (There is risk of burn.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 39 of 48...
  • Page 40 Do not touch the ignition plug cap or high-voltage cord during operation. (There is risk of electric shock or physical injury.) Do not operate the engine with the muffler or air cleaner cover removed  : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 40 of 48...
  • Page 41 When it is necessary to adjust, consult your dealer. High speed fuel adjusting screw Do not decrease the thickness of fuel too much. (It could result in the seizure trouble of engine.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 41 of 48...
  • Page 42 Cleaning of air cleaner Wash the element with white kerosene and then immerse it in engine oil. Squeeze it tightly with single hand. Use of fire is strictly prohibited : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 42 of 48...
  • Page 43 Make sure to clean spilled fuel sufficiently before using the engine.  Do not wash the engine with water.  Do not change the setting revolution speed carelessly. (Consult your dealer when  changing the revolution speed.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 43 of 48...
  • Page 44 Make sure to drain the fuel when storing the unit for a long period of time. Sufficient care must be taken not to use fires at the vicinity when handling the fuel. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200...
  • Page 45 KisanKraft PRODUCT RANGE KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel Backpack Brush Cutter Sprayers and Accessories...
  • Page 46 KisanKraft Wide Range of Products for Every Need MISSED CALL: 07676065555 For more information give Many of our products have BIS: ISI certification. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 46 of 48...
  • Page 47 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 48 Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer.

Table of Contents