KISANKRAFT KK-IC-8626 User Manual

Agricultural inter-cultivator
Hide thumbs Also See for KK-IC-8626:

Advertisement

Quick Links

KisanKraft
Warranty Certificate
®
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction is the result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court's jurisdiction.
ChainsawsBrush Cutters and AccessoriesHarvesters
Our
Engines and Water PumpsHand
Products
Cultivators and
AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Limited
(formerly known as KisanKraft Machine Tools P Ltd)
: info@kisankraft.com
: www.kisankraft.com
(K
K
C
)
ISAN
RAFT
OPY
Tools
Garden Tools
Milking Machines
: +91.80.22178200
Page 48 of 48
KisanKraft
Warranty Certificate
®
Agricultural
Product
Inter-Cultivator
KisanKraft
Brand
 KK-IC-8626
Model
 KK-IC-8657
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The purchaser
shall satisfy himself with the product, including any product demonstration or
verification of any function, before buying. KisanKraft Limited or its authorized
dealers, including online sellers, shall not be liable to give any on-site demonstration
after purchase of any of the product.
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Limited
(formerly known as KisanKraft Machine Tools P Ltd)
: info@kisankraft.com
: www.kisankraft.com
(D
C
)
EALER
OPY
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
.
EARLIER
Dealer's
Invoice No.
Dealer's Stamp (
Address, Phone, TIN, etc.):
Dealer's Sign
: +91.80. 22178200
Page 1 of 48

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-IC-8626 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KISANKRAFT KK-IC-8626

  • Page 1 Modifications of Warranty: No agent, representative, dealer, or employee of free from defects in material or workmanship. All parts defective in material and KisanKraft Limited or any of its manufacturers has the authority to increase or alter the workmanship are covered.
  • Page 2 Modifications of Warranty: No agent, representative, dealer, or employee of Dealer’s Sign Sign KisanKraft Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. What is covered: KisanKraft Limited and its manufacturers warrant this product to be Assignment / Transfer of warranty: The warranty cannot be assigned and shall not free from defects in material or workmanship.
  • Page 3 ® User Manual Wide Range of Products for Every Need KisanKraft Limited (Formerly known as KisanKraft Machine Tools Pvt. Ltd) Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA ♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦...
  • Page 4 Agricultural Inter-Cultivator ® ® PRODUCT RANGE KK-IC-8626 / 8657 KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel...
  • Page 5: Table Of Contents

    KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 CONTENTS STORAGE When releasing the engine from operation for more than 30 days, it must be serviced and BEFORE GETTING STARTED ............... 8 stored as follows with care to prevent the starting trouble or malfunction due to degeneration of fuel.
  • Page 6 This work requires engine servicing skill and some tools. Consult the dealer or nearest What is not covered: The warranty shall become null and void and neither KisanKraft service center. Limited nor any of its manufacturers, nor its authorized dealers assumes any...
  • Page 7 Modifications of Warranty: No agent, representative, dealer, or employee of Inspection, cleaning  KisanKraft Limited or any of its manufacturers has the authority to increase or alter of fuel filter the obligations of this warranty. Removal of carbon ...
  • Page 8: Before Getting Started

    Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 BEFORE GETTING STARTED ADJUSTING THE CARBURETOR We wish to thank you for choosing our product. We are confident that the high quality of Engine revolution speed is adjusted at the optimum condition before shipping our product will meet your requirement and will give you long-lasting service.
  • Page 9 KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657  PRECAUTIONS DURING OPERATION While working, always wear substantial footwear and long trousers. Do not operate the equipment with barefoot or wearing open sandals.   After starting the engine, set Always wear ear and eye protection.
  • Page 10: Assembly Instructions

    KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657  STOP Always pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent arm or hand injury. Stop the engine whenever you leave the machine.
  • Page 11 ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 If you move the throttle lever to the high-speed side a little after the engine has started, the starter lever returns to the operating position. Continue the warm- up operation for 2 to 3 minutes in this condition. Observing the condition of the engine, move the throttle lever to a desired engine speed.
  • Page 12 KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 START (STARTER LEVER TYPE UNIT) Place two wheel Assembly onto Remove the axle assembly from the axle Assembly. Please notice the Tiller/Cultivator direction wheel Assembly Engine switch Turn the engine switch to the “ON” side.
  • Page 13 KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 OPERATION INSTRUCTIONS How to Assemble Handles: Attach the middle handle to the Attach the left handle and right Methods of starting & stopping the engine lower handle using the knobs and handle to the middle handle using bolts provided.
  • Page 14 KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 Remember INSPECTION OF RESPECTIVE SECTIONS:  Always mix two-cycle oil with gasoline before fueling your Tiller/Cultivator. Never, Make sure to inspect these sections before operating the engine. ever run your Tiller/Cultivator on gasoline alone. This will ruin your engine and void all warranties.
  • Page 15: Starting Instructions

    KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 STARTING INSTRUCTIONS Throttle wire adjust screw Starting Your Tiller/Cultivator for the First Time Cold Engine) Fill the fuel tank with the proper oil/gasoline mixture. (See previous section.) Hand tighten the gasoline cap just until its snug.
  • Page 16 KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 COMPONENTS OVERVIEW Move the choke lever to the Close (Choke)position Then pull the starter cord again. The engine should start and run. Let the Recoil starter grip Engine switch engine warm up two to three minutes before using.
  • Page 17 Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657  Do not operate the engine when grass, leaves or inflammable substances are WARNING: If the engine does not stop when switch is set to the stop position, release sticking in or around the muffler.
  • Page 18: Tilling

    KisanKraft KisanKraft Agricultural Inter-Cultivator ® ® 2-STROKE PETROL ENGINE KK-IC-8626 / 8657 IMPORTANT NOTE: 2 STROKE PETROL ENGINE- MANUAL Never use starting fluids. Starting fluids will cause permanent engine damage. Using them will void the warranty. TILLING If you’ve seen other Tiller/Cultivators, your Tiller/Cultivator may surprise you. It tills best when you pull it backward! When you pull your Tiller/Cultivator backward, you give extra resistance to the tines, so they dig deeper.
  • Page 19 KisanKraft KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657 Part No. Part Name Part No Part Name Fan Cover Screw M5x25-Hex Clip Needle Bearing-Piston Pin Circlip-Piston Pin Stand-Fuel Tank Piston Screw M5x30-Hex Piston Pin Out Let-Muffler...
  • Page 20: Maintenance

    KisanKraft KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657 MAINTENANCE PARTS LIST-ENGINE ASSEMBLY How to Check, Clean and Change the Air Filter: Part No. Part Name Part No Part Name Check the air filter every 25 hours of use or more frequently if used under dusty conditions.
  • Page 21 KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657  PARTS DIAGRAM-ENGINE ASSEMBLY When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any debris. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire.
  • Page 22 KisanKraft KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657 Every Every Every PARTS LIST-TILLER/CULTIVATOR ASSEMBLY System/ Before Procedure Note Component Hours Hours Hours Part No Part Name Part No Part Name Air Cooling Vent Handle Grip...
  • Page 23: Storage

    KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657 PARTS DIAGRAM-TILLER/CULTIVATOR ASSEMBLY STORAGE Take the following measures before storing your Tiller/Cultivator for a long period: Do not store your Tiller/Cultivator with fuel still in it. Even under ideal conditions, stored fuel containing ethanol or MTBE can start to go stale in 30 days.
  • Page 24: Technical Specifications

    KisanKraft KisanKraft Agricultural Inter-Cultivator Agricultural Inter-Cultivator ® ® KK-IC-8626 / 8657 KK-IC-8626 / 8657 TECHNICAL SPECIFICATIONS TROUBLESHOOTING Case 1. Starting failure Product Code KK-IC-8626/8657 Check Probable Causes Action to be taken 1.5kW(2 hp) Drain it and fill the tank with...

This manual is also suitable for:

Kk-ic-8657

Table of Contents