Table of Contents
Advertisement
•
If the machine has a low resistance to Earth the timer card may become confused and LEDs may
not display and the machine may not start.
•
If a new timer card has been fitted and will not come off the test cycle, check: -
1. The correct card has been fitted. The version is stamped on the label.
2. Check for low resistance to Earth. Test the wash pump and heater from their terminals.
3. Check that the 2 flying leads on the module have not been crossed.
4. Check the display card is fitted into the console correctly and none of the buttons are stuck.
24
Hide quick links:
Advertisement
Table of Contents
