Table of Contents
Advertisement
Quick Links
Instructions for use
DISHWASHER
Contents
GB
English
Installation, 4-6
Connecting the electricity and water supplies
FDUD 44110 ULTIMA
Loading the racks, 8-9
Adjusting the upper rack
Start-up and use, 10
Wash cycles, 11
Table of wash cycles
Cutting off the water and electricity supplies
Troubleshooting, 15
Guarantee, 17
Advertisement
Table of Contents
Related Manuals for Hotpoint FDUD 44110 Ultima
Summary of Contents for Hotpoint FDUD 44110 Ultima
-
Page 1: Table Of Contents
Advice regarding the first wash cycle SETTINGS button Selecting the language Child safety lock Description of the appliance, 7 Overall view Control panel FDUD 44110 ULTIMA Loading the racks, 8-9 Lower rack Cutlery basket Upper rack Adjusting the upper rack Start-up and use, 10... -
Page 2: Precautions And Safety Advice
Precautions and safety advice • The packaging material should not be used as a toy: The appliance was designed and manufactured in it can become a choking or suffocation hazard. compliance with current international safety standards. The following information has been provided for safety If your family includes children: reasons and should therefore be read carefully. -
Page 3: Recycling & Disposal Information
Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. -
Page 4: Installation
‘L’ from the use of non-original spare parts. Electrical Connection Changing the Mains Lead Before inserting the plug into the electrical socket, make sure A lead can be ordered from Hotpoint Service that: UK: 08709 066 066 or Republic of Ireland: 1850 302 220 • the socket is earthed and complies with current regulations; - If you have damaged the existing lead or require a longer one • the socket can withstand the maximum load of the appliance,... -
Page 5: Technical Data
The Company shall not be held responsible for any If the inlet hose is not long enough, contact a specialist incidents that occur if these regulations are not observed. (see Assistance) store or an authorised technician The water pressure must be within the values indicated Anti-condensation strip (see Installation). -
Page 6: Advice Regarding The First Wash Cycle
• If fitting an under sink waste Advice regarding the first wash cycle disposal unit, cut out the membrane, After the appliance has been installed, immediately before bung or blanking plug. running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt ( chapter Rinse-aid and refined salt ). -
Page 7: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent and rinse-aid dispensers and device Active Oxigen Data plate **** Control panel Turbo Dry Control Panel Extra Drying option button SETTINGS button Select wash On-Off/Reset Multi-functional Key lock button cycle arrows button and Tablets button... -
Page 8: Loading The Racks
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely. -
Page 9: Upper Rack
Tip-up compartments with adjustable position The upper rack can be adjusted for height based on requirements: The side tip-up compartments can be positioned at three high position to place bulky crockery in the lower rack and low different heights to optimize the arrangement of crockery inside position to make the most of the tip-up compartments/sectors the rack. -
Page 10: Starting The Dishwasher
Start-up and use Starting the dishwasher Measuring out the detergent A good wash result also depends on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button: The ON/OFF indicator light and result in a more effective wash and increases environmental the display light up. -
Page 11: Wash Cycles
Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycles Approximate Instructions on wash-cycle selection and Wash cycle with Options duration of detergent dosage drying wash cycles Environmentally-friendly wash cycle with low energy Delayed start –... -
Page 12: Special Wash Cycles And Options
Special wash cycles and Options Notes: Zone Wash Optimum performance levels when using the “Fast wash” This option makes it possible to carry out the wash and “Express 30’” cycles can be achieved by respecting the cycle in the selected rack only. Select the wash specified number of place settings. cycle and then press the ZONE WASH button: the selected rack lights up and the wash cycle starts in the selected rack The Eco wash cycle complies with regulation EN-50242. -
Page 13: Rinse Aid And Refined Salt
Rinse aid and refined salt This dishwasher offers a setting which helps to reduce pollution Only use products which have been specifically designed and optimises washing performance in accordance with the for dishwashers. water hardness level in your area. This information can be Do not use table/industrial salt or washing-up liquid. -
Page 14: Care And Maintenance
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They should be cleaned if you wish to achieve the best results • Always unplug the appliance when cleaning it and when in every wash. -
Page 15: Troubleshooting
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. controlled. • The appliance has not been plugged in properly. •... -
Page 16: After-Sales Service
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer. -
Page 17: Guarantee
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. - Page 20 195111617.01 03/2013 pb - Xerox Fabriano...
Need help?
Do you have a question about the FDUD 44110 Ultima and is the answer not in the manual?
Questions and answers