Hotpoint FDEF 51110 EXPERIENCE Instructions For Use Manual
Hide thumbs
Also See for FDEF 51110 EXPERIENCE:
- Instructions for use manual (20 pages) ,
- Operating instructions manual (16 pages)
Table of Contents
Advertisement
Instructions for use
GB
English, 1
FDEF 51110 EXPERIENCE
Contents
Installation, 5-6-7
Connecting the electricity and water supplies
Loading the racks, 9-10
Adjusting the upper rack
Start-up and use, 11
Wash cycles, 12
Table of wash cycles
Cutting off the water and electricity supplies
Troubleshooting, 16
Guarantee, 18
DISHWASHER
Advertisement
Table of Contents
Related Manuals for Hotpoint FDEF 51110 EXPERIENCE
Summary of Contents for Hotpoint FDEF 51110 EXPERIENCE
-
Page 1: Table Of Contents
Connecting the electricity and water supplies Technical data Advice regarding the first wash cycle Description of the appliance, 8 Overall view Control panel FDEF 51110 EXPERIENCE Loading the racks, 9-10 Lower rack Upper rack Third rack Adjusting the upper rack... -
Page 2: Product Fiche
Product Fiche Product Fiche HOTPOINT Brand FDEF 51110 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) 302.0 Energy consumption per year in kWh (2) 1.07 Energy consumption of the standard cleaning cycle in kWh... -
Page 3: Precautions And Safety Advice
Precautions and safety advice • The packaging material should not be used as a toy: The appliance was designed and manufactured in it can become a choking or suffocation hazard. compliance with current international safety standards. The following information has been provided for safety If your family includes children: reasons and should therefore be read carefully. -
Page 4: Recycling & Disposal Information
Recycling & Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. -
Page 5: Positioning And Levelling
‘L’ from the use of non-original spare parts. Electrical Connection Changing the Mains Lead Before inserting the plug into the electrical socket, make sure A lead can be ordered from Hotpoint Service that: UK: 08709 066 066 or Republic of Ireland: 1850 302 220 • the socket is earthed and complies with current regulations; - If you have damaged the existing lead or require a longer one • the socket can withstand the maximum load of the appliance,... -
Page 6: Technical Data
The Company shall not be held responsible for any If the inlet hose is not long enough, contact a specialist incidents that occur if these regulations are not observed. (see After Sales Service) store or an authorised technician The water pressure must be within the values indicated Anti-condensation strip (see Installation). -
Page 7: Advice Regarding The First Wash Cycle
Switching the appliance on for the first time Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and Advice regarding the first wash cycle causing a flood. fter the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack, if any. -
Page 8: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Third rack* Lower rack Lower sprayer arm Washing filter Salt dispenser 10. Detergent and rinse-aid dispensers and device Active Oxigen 11. Data plate Control panel Control Panel Delayed Start buttons Multi-functional Tablets option button (Tabs) Wash-Cycle Selection buttons On-Off/Reset button Start/Pause button Display... -
Page 9: Loading The Racks
Loading the racks Tips Several dishwasher models are fitted with tip-up sectors They can be used in a vertical position when arranging dishes Before loading the racks, remove all food residues from the or in a horizontal position (lower) to load pans and salad bowls crockery and empty liquids from glasses and containers. -
Page 10: Unsuitable Crockery
Third rack The upper rack can be adjusted for height based on requirements: high position to place bulky crockery in the lower The third rack was designed to house the cutlery. Arrange the rack and low position to make the most of the tip-up dispensers/ cutlery as shown in the figure. sectors by creating more space upwards. -
Page 11: Start-Up And Use
Start-up and use Measuring out the detergent Starting the dishwasher A good wash result also depends on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button. result in a more effective wash and increases environmental 3. Open the door and pour in a suitable amount of detergent pollution. -
Page 12: Wash Cycles
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water Energy which Wash cycle Options duration of wash consumption... -
Page 13: Special Wash Cycles And Options
Special wash cycles and Options Extra drying Notes: To improve the dryness level of the crockery, press Optimum performance levels when using the “Fast wash” the EXTRA DRYING button and the symbol/indicator light will and “Express 30’” cycles can be achieved by respecting the light up. If it is pressed again, the option will be deselected. specified number of place settings. -
Page 14: Rinse Aid And Refined Salt
Rinse aid and refined salt Only use products which have been specifically designed water hardness level in your area. This information can be for dishwashers. obtained from your local water supplier. Do not use table salt or industrial salt, or washing up liquid. Switch on the dishwasher using the ON/OFF button, wait a few Follow the instructions given on the packaging. -
Page 15: Care And Maintenance
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They should be cleaned if you wish to achieve the best results • Always unplug the appliance when cleaning it and when in every wash. -
Page 16: Troubleshooting
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance Problem: Possible causes / Solutions: The dishwasher does not start or cannot • Switch off the appliance by pressing the ON/OFF button, switch it back on be controlled. after approximately one minute and reset the cycle. • The appliance has not been plugged in properly. •... -
Page 17: After-Sales Service
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer. -
Page 18: Guarantee
5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. - Page 20 195109504.02 04/2013 jk - Xerox Fabriano...
Need help?
Do you have a question about the FDEF 51110 EXPERIENCE and is the answer not in the manual?
Questions and answers