The start and stop buttons on a Hotpoint FDAL28 may be flashing because the appliance is locked due to no action being taken when the indicator lights were flashing. To resolve this, switch off the machine using the ON/OFF button, turn on the tap, and switch the machine back on after 20 seconds by pressing the same button. Then, re-programme the machine and restart the wash cycle.

This answer is automatically generated

Alan Bishop

June 1, 2025

What is the noise level in Db

Summary of Contents for Hotpoint FDAL28

Page 1: Table Of Contents
Leaving the machine unused for extended periods Precautions and advice, 13 General safety Disposal Saving energy and respecting the environment Troubleshooting, 14 After Sales Service, 15 After Sales Service Essential Contact Information Parts and Accessories Appliance Registration Recycling and Disposal Information Hotpoint Guarantee, 16...
Page 2: Installation
All manuals and user guides at all-guides.com Installation Advice regarding the first wash cycle see chapter entitled Rinse aid and refined salt see chapter entitled Rinse aid and refined salt Technical data width 60 cm height 85 cm Dimensions depth 60 cm Capacity 12 standard place-settings Positioning and levelling...
Page 3: Electrical Connection
All manuals and user guides at all-guides.com Green/Yellow - Earth Blue Neutral Brown Live Electrical Connection EARTH ‘E’ NEUTRAL ‘N’ LIVE ‘L’ see Description of the appliance see After Sales Service See After Sales Service...
Page 4 All manuals and user guides at all-guides.com Connecting the water supplies Sink Waste System see After Sales Service see Installation...
Page 5 All manuals and user guides at all-guides.com New Acqua Stop...
Page 6: Description Of The Appliance
All manuals and user guides at all-guides.com Description of the appliance Overall view Upper rack Upper sprayer arm Tip-up compartments Rack height adjuster Lower rack Lower sprayer arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control panel Control panel Half load...
Page 7: Loading The Racks
All manuals and user guides at all-guides.com Loading the racks Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. In order to make it easier to arrange the crockery, the upper After loading the appliance, check that the sprayer arms rack may be moved to a higher or lower level.
Page 8: Start-Up And Use
All manuals and user guides at all-guides.com Start-up and use Starting the dishwasher Measuring out the detergent see below see Loading the racks see adjacent information Compartment A: Compartment B: Table of wash cycles Only available in selected models.
Page 9 All manuals and user guides at all-guides.com Wash options The OPTIONS may only be set, modified or reset after the wash cycle has been selected and before the Start/Pause button has been pressed. Remember to halve the amount of detergent. (see Table of wash It is better to use powder detergent in this case.
Page 10: Wash Cycles
All manuals and user guides at all-guides.com Wash cycles If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. The number and type of wash cycles and options may vary depending on the dishwasher model. Detergent Wash Wash cycle...
Page 11: Rinse Aid And Refined Salt
All manuals and user guides at all-guides.com Rinse aid and refined salt level. There is a water hardness level for every wash cycle: E.g.: wash cycle 1, water hardness level 1 wash cycle 2, water hardness level 2, etc. etc., up to a maximum of five levels.
Page 12: Care And Maintenance
All manuals and user guides at all-guides.com Care and maintenance Cleaning the filters NEVER REMOVE (fig. 4) Leaving the machine unused for extended periods Only available in selected models.
Page 13: Precautions And Advice
• Keep detergents and rinse aids away from children. • Keep children away from the open door of a dishwasher, As part of Hotpoint's continued commitment to helping the there could still be some detergent left inside. environment, Hotpoint reserves the right to use quality...
Page 14: Troubleshooting
All manuals and user guides at all-guides.com Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Problem: Possible causes / Solutions: The dishwasher does not start • Switch off the appliance by pressing the ON/OFF button, switch it back on after or cannot be controlled approximately one minute and reset the program.
Page 15: After Sales Service
All manuals and user guides at all-guides.com After Sales Service Appliance Registration After Sales Service We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. Essential Contact Information We are the largest service team in the country Indesit Company UK Ltd.
Page 16 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.

This manual is also suitable for:

Fdl570

Hotpoint FDAL28 Instruction Booklet

Quick Links

Need help?

Questions and answers

Related Manuals for Hotpoint FDAL28

Summary of Contents for Hotpoint FDAL28

This manual is also suitable for:

Table of Contents