Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint FDFAO 11011 EXTRA

  • Page 1: Table Of Contents

    FDFAO 11011 EXTRA English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 3 Installation, 4-5-6 Description of the appliance, 7 Refined salt and rinse aid, 8 Loading the racks, 9-10 Detergent and dishwasher use, 11...
  • Page 2: Precautions And Advice

    Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards.
  • Page 3: Product Data

    Product Data (product fiche) Product Fiche HOTPOINT Brand FDFAO 11011 EXTRA Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) 1.04...
  • Page 4: Installation

    Installation be function properly. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto Make sure the hose is not bent, compressed or kinked. its back. DO NOT overtighten the hose connector, hand tight is Positioning and levelling sufficient.
  • Page 5 Electrical connection Changing the Mains Lead A lead can be ordered from Hotpoint Service: Before inserting the plug into the electrical socket, make sure that: - If you have damaged the existing lead or require a longer one • The socket is earthed and complies with current a charge will be made.
  • Page 6 Technical data (depending on the The machine has a buzzer/set of tones dishwasher model ) to inform the user that a command has width 60 cm Dimensions height 85 cm been implemented: power on, cycle end etc. depth 60 cm The symbols/indicator lights/LEDs on the control panel/ Capacity 13 standard place-settings...
  • Page 7: Description Of The Appliance

    Description of the appliance Overall view Upper rack Upper spray arm Tip-up dispensers Rack height adjuster Lower rack Lower spray arm Washing filter Salt dispenser Detergent dispenser, rinse-aid dispenser and Active Oxygen device Data plate Control panel Control panel Extra Drying Option button Half Load Option button On-Off/Reset Start/Pause...
  • Page 8: Refined Salt And Rinse Aid

    Refined Salt and Rinse Aid Average salt dispenser Only use products which have been specifically designed Water Hardness Table capacity duration for dishwashers. Do not use table salt or industrial salt. level °dH °fH mmol/l months Follow the instructions given on the packaging. 0 - 6 0 - 10 0 - 1...
  • Page 9: Loading The Racks

    Loading the racks Tips Several dishwasher models are fitted with tip-up sectors Before loading the racks, remove all food residues from the They can be used in a vertical position when arranging dishes crockery and empty liquids from glasses and containers. No or in a horizontal position (lower) to load pans and salad bowls preventive rinsing is needed under running water.
  • Page 10 Tip-up compartments with adjustable position The upper rack can be adjusted for height based on requirements: The side tip-up compartments can be positioned at three different high position to place bulky crockery in the lower rack and low heights to optimize the arrangement of crockery inside the rack. position to make the most of the tip-up compartments/sectors by creating more space upwards.
  • Page 11: Detergent And Dishwasher Use

    Detergent and dishwasher use Measuring out the detergent Starting the dishwasher Good washing results also depend on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button: The ON/OFF indicator light and the result in a more effective wash and increases environmental display light up.
  • Page 12: Wash Cycles

    Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash Cycle Water Energy...
  • Page 13: Special Wash Cycles And Options

    Special wash cycles and Options Notes: Extra Drying Option Optimum performance levels when using the “Fast" and To improve the dryness level of the crockery, press "Express 30’” cycles can be achieved by respecting the the EXTRA DRYING button; the indicator light will illuminate. specified number of place settings.
  • Page 14: Care And Maintenance

    Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They must be cleaned if you wish to achieve the best results •...
  • Page 15: Troubleshooting

    Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •...
  • Page 16: Product Guarantee And Repair Information

    03/2015 jk - Xerox Fabriano and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to hel- ping the environment, Hotpoint reserves the right to 12 Months Parts and Labour Guarantee use quality, recycled components to keep down cu- Your appliance has the benefit of our manufacturer’s...

Table of Contents