FDUD 51110 ULTIMA English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 3 Installation, 4-5-6 Description of the appliance, 7 Refined salt and rinse aid, 8 Loading the racks, 9-10 Detergent and dishwasher use, 11...
Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards.
• Only begin a wash cycle when the commitment to helping the environment, dishwasher is full. While waiting for the Hotpoint reserves the right to use quality dishwasher to be filled, prevent unpleasant recycled components to keep down odours with the Soak cycle...
Installation be function properly. If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto Make sure the hose is not bent, compressed or kinked. its back. DO NOT overtighten the hose connector, hand tight is Positioning and levelling sufficient.
Electrical connection Changing the Mains Lead A lead can be ordered from Hotpoint Service Before inserting the plug into the electrical socket, make UK: 08709 066 066 or sure that: Republic of Ireland: 1850 302 220 • The socket is earthed and complies with current - If you have damaged the existing lead or require a longer one regulations;...
Technical data The control panel features a “Touch Control” system press the symbols lightly with your fingertips to activate width 60 cm Dimensions height 85 cm the command. depth 60 cm (depending on the The machine has a buzzer/set of tones Capacity 15 standard place-settings dishwasher model...
Description of the appliance Overall view Upper rack Upper spray arm Tip-up dispensers Rack height adjuster Third rack* Lower rack Lower spray arm Washing filter Salt dispenser Detergent and rinse-aid dispensers and device Active Oxygen Data plate Control panel Control Panel Extra Drying Option button Select Wash cycle arrows/buttons...
Refined salt and rinse aid Average autonomy Only use products which have been specifically designed Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day Follow the instructions given on the packaging. level °dH °fH...
Loading the racks Tips Some models are equipped with Vertical Zone, special pull-out Before loading the racks, remove all food residues from the supports in the rear of the rack that can be used to support crockery and empty liquids from glasses and containers. No frying pans and baking pans in a more vertical position, thus preventive rinsing is needed under running water.
Third rack The upper rack can be adjusted for height based on requirements: high position to place bulky crockery in the lower rack and low The third rack was designed to house the cutlery. Arrange the position to make the most of the tip-up compartments/sectors cutlery as shown in the figure.
Detergent and dishwasher use Starting the dishwasher Measuring out the detergent Good washing results also depend on the correct amount of 1. Turn the water tap on. detergent being used. Exceeding the stated amount does not 2. Press the ON/OFF button: The ON/OFF indicator light and result in a more effective wash and increases environmental the display light up.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Duration of Water Energy...
Special wash cycles and Options Zone Wash Option Notes: This option makes it possible to carry out the wash Optimum performance levels when using the “Fast wash” and cycle in the selected rack only. Select the wash cycle “Express 30’” cycles can be achieved by respecting the specified and then press the ZONE WASH button: the selected rack number of place settings.
Care and maintenance Shutting off the water and electricity Cleaning the filters supplies The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. • Turn off the water tap after every wash cycle to avoid leaks. They must be cleaned if you wish to achieve the best results in •...
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. or cannot be controlled. •...
After Sales Service After Sales Service Appliance Registration No one is better placed to care for your Hotpoint We want to give you additional benefits of Hotpoint appliance during the course of its working life than ownership. To activate your free 5 year parts guarantee us - the manufacturer.
We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448 224 224 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to...
Need help?
Do you have a question about the FDUD 51110 ULTIMA and is the answer not in the manual?
Questions and answers