Secure The Chassis - Avaya Virtual Services Platform 9000 Series Installation Manual

Use the recessed handles at the top and bottom of the chassis sides to lift the chassis. From
the rear: Lift the chassis from the bottom only.
Important:
Reduce the weight of the chassis as much as possible before you lift it. Always use a
mechanical lift when one is available. Ensure you have at least three people to lift the
chassis. Use a third person to support the chassis from behind the rack, as you position the
chassis on the shelf and hold it in place. Take care to lift the chassis from the bottom.

Secure the chassis

About this task
Mount the Avaya Virtual Services Platform 9000 chassis in a standard two-post or four-post
equipment rack.
Procedure
1. Hold the Virtual Services Platform 9000 chassis in position and align the flanged
2. Ensure that the 7 hole pairs on either side of the rack vertical supports match
3. Insert 4 phillips screws through each hole on the mounting bracket in the 7 screw
Installation — Chassis
end of the chassis mounting bracket with the holes on either side of the vertical rack
support.
horizontally.
positions in the flange and rack. If you'll be installing the optional I/O cable bracket
Secure the chassis
October 2011 27