Cisco 7401Asr Router Interface Addresses; Cisco 7500 Series Routers Interface Addresses - Cisco PA-VXA Series Installation And Configuration Manual

T1/e1 digital voice port adapter

Table of Contents

Chapter 1

Overview

Cisco 7401ASR Router Interface Addresses

This section describes how to identify the interface addresses used for the the PA-VXB-2TE1+(=) or the

PA-VXC-2TE1+(=) in a Cisco 7401ASR router. In the Cisco 7401ASR router, slot 1 is the port adapter

slot you use for any of these two port adapters. (See

a two-part number in the format port-adapter-slot-number/interface-port-number. See

interface address format.

The Cisco 7401ASR router is currently supported by the PA-VXB-2TE1+(=)

Note

and the PA-VXC-2TE1+(=) port adapters only.

This section describes how to identify the interface addresses used for the PA-VXA, PA-VXB, and

PA-VXC on a VIP in Cisco 7500 series routers.

Although the processor slots in the seven-slot Cisco 7507 and the thirteen-slot Cisco 7513 and

Note

Cisco 7576 are vertically oriented and those in the five-slot Cisco 7505 are horizontally oriented, all

Cisco 7500 series routers use the same method for slot and port numbering.

The interface address is composed of a three-part number in the format

interface-processor-slot-number/port-adapter-slot-number/interface-port-number. See

the interface address format.

OL-3592-02

Figure

1-8.) The interface address is composed of

T1/E1 Digital Voice Port Adapter Installation and Configruation

Identifying Interface Addresses

Table 1-3

for the

Table 1-3

for

1-11

Table of Contents