Table of Contents
Advertisement
Quick Links
BAS6530
BRINKMANN Immersion Pumps
STA/SAL1130...2000, SGL1400...1700,
SFL1360...1860
BRINKMANN PUMPS, Inc.
47060 Cartier Drive
Wixom, MI 48393
USA
Phone: +1 248 926 9400
Fax.:
+1 248 926 9405
Subject to change without prior notice.
Brinkmann Pumps, Inc.
Operating Instructions
04/2019
Edition
www.brinkmannpumps.com
sales@brinkmannpumps.com
Order - No.: BAS6530 ENGLISH
Page 1 of 11
Advertisement
Table of Contents
Related Manuals for Brinkmann SAL1130 Series
Summary of Contents for Brinkmann SAL1130 Series
-
Page 1: Operating Instructions
BRINKMANN PUMPS, Inc. 47060 Cartier Drive Wixom, MI 48393 Phone: +1 248 926 9400 www.brinkmannpumps.com Fax.: +1 248 926 9405 sales@brinkmannpumps.com Subject to change without prior notice. Order - No.: BAS6530 ENGLISH Brinkmann Pumps, Inc. 04/2019 Page 1 of 11 Edition... -
Page 2: Table Of Contents
Brinkmann Immersions Pumps of the Series STA/SAL1130 ... 2000, SGL1400 and SFL1360…1860 Contents Indication to the manual ........2 8 Servicing and Maintenance ....... 6 Description of the Product ......2-3 9 Troubleshooting Guide ........7 Safety instructions ..........4 10 Spare Parts ............. - Page 3 Technical data Max. del. Max. del. Height Depth of Weight Power Noise level pressure volume immersion spec. weight 1 Inches dBA / 60 Type Type l/min Inches STA1130S 300 SAL1130S 310 2200 24.4 11.81 16.9 16.93 12.6 21.65 31.50 1050 1060 41.34 1050 STA1600S 300...
-
Page 4: Safety Instructions
3 Safety instructions Safety instructions relevant for operation • If hot or cold machine components involve haz- When operating the pump, the safety instructions contained in this manual, the relevant national acci- ards, they must be guarded against accidental dent prevention regulations and any other service and contact. -
Page 5: Installation And Connection
5 Installation and Connection Electric wiring Mechanical installation During any assembly or disassembly process the pumps must be secured against tipping trough ropes for exam- ple at all times. All service work must be carried out by qualified Pumps must be mounted securely. Piping, tank and service personnel. -
Page 6: Start-Up / Shut-Down
Circuit on request 7 Operation ∆ Liquid level (Star connection) (Delta connection) up to 7.4 HP According to the drawing shown below, the maximum 8, 8.7, 10.1, 12.1, 14.7, 17.4 HP (5.5 kW) (6, 6.5, 7.5, 9, 11, 13 kW) liquid level must stay about 1.18 Inches (30 mm) below the mounting flange, also ensure that the minimal liquid level for the STA pump is 3.15 Inches... -
Page 7: Troubleshooting Guide
9 Troubleshooting Guide Fault Cause Remedy Motor does not start, no motor At least two of the power supply Check fuses, terminals and supply noise leads have failed leads . Overload has tripped Inspect overload Motor does not start, humming noise One of the supply leads has failed See above Impeller faulty... -
Page 8: Spare Parts
10 Spare Parts 10.1 Spare Part List for the Immersion umps of the Series STA/SAL1130 ... 2000 SGL1400…1700, SFL1360…1860 Item Description Stator with terminal board Motor flange End shield Terminal box frame Terminal box cover Fan cover Ball bearing 10.0 HP DIN 625 Ball bearing 11.5 HP DIN 628... -
Page 9: Repair
10.2 Indications to the spare part order 11.2 Assembling the insert shaft and motor shaft Spare parts are available from the supplier. ATTENTION Standard commercially available parts are to be purchased in accordance with the model type. Clean the contact surfaces of the insert shaft (2) The ordering of spare parts should contain the follow- (inside) and the motor shaft (3). -
Page 10: Terms And Conditions
Brinkmann to inspect, at any made by Brinkmann or the buyer or their to property, or the loss of use thereof and reasonable time, said part and the ma- respective representatives. -
Page 11: Terms And Conditions
Such articles as shall in the sole judgment of Brinkmann and all copies thereof from any source constitute an improvement over former shall be returned to Brinkmann at any time practice.