Switching The Time Program On/Off; Selecting The Operating Status And Setting A Value - Viessmann VITOPEND 100-W Operating Instructions Manual

Time program

Switching the time program on/off

Press the following buttons:
1. MODE repeatedly, until "SEt"
appears on the main dis-
play, together with flashing
symbols
2. / until "On" or "OFF"
appears on the additional
display.

Selecting the operating status and setting a value

Depending on the operating mode of
the heating system you can input differ-
ent settings for the operating status.
The currently active operating status is
shown next to the additional display.
Operation without room temperature controller
You select the heating water temperature. Example:
Operating status I
Room temperature-dependent operation
You select the set room temperature. Example:
Operating status I
(cont.)
, p and .
p
°C
Ⅰ
p
°C
Ⅰ
3. OK to confirm
Note
"On" Time program is switched on.
"OFF" Time program is switched off.
II Standard heating mode
I Reduced heating mode
0 Standby mode
Operating status II
Ⅱ
Operating status II
Ⅱ
Central heating
p
°C
p
°C
21