Advertisement
M O D E L S 4 2 4
A N D
4 2 4 F S
A N T I - T I P B R AC K E T
To prevent the unit from tipping forward
and provide a stable installation, the unit
must be secured in place with the anti-tip
bracket.
An anti-tip bracket and hardware is provided
with the Wine Storage unit. The anti-tip
bracket must be installed on a solid base to
prevent tipover in case several loaded wine
shelves are extended at the same time.
M O D E L 4 2 4
The anti-tip bracket should be attached to the
wall behind the unit with the bracket flange
located immediately above the top of the unit.
Refer to illustration 1 below.
A smaller metal 'countertop' bracket is also
provided with the Model 424, for installations
that need to be modified to provide a secure
surface for attaching the bracket. This bracket
will secure the front of the unit to the under-
side of the countertop, above the unit. Refer to
illustration 2.
Anti-Tip
Bracket
1
/
"
4
(6)
Illus. 1
I N S TA L L A T I O N
I N S TA L L A T I O N
Countertop
Bracket
Illus. 2
M O D E L 4 2 4 F S
If you are installing the Model 424FS in a
5
space deeper than 24
/
" (625), the anti-tip
8
bracket must be installed no more than 24
(625) deep, so it engages the unit properly. It is
important that this measurement be made
from the front surface of the door, to the back
of the anti-tip bracket. Refer to illustration 3
below.
Anti-Tip Bracket
Illus. 3
M O D E L S
4 2 4 | 4 2 4 F S
5
/
"
8
5
Advertisement
