Advertisement
M O D E L S 4 2 7
A N D
4 2 7 R
F I N I S H E D W O O D
S I D E PA N E L S
Side panels for Models 427 and 427R are not
attached to the unit. You must securely fasten
the panels to adjacent cabinets and floor.
Panels should be fastened to the floor and
walls using 'L' brackets (hardware not
provided). To help you move the unit into
place, rout out an area in the floor so the 'L'
bracket will sit flush with the floor level.
Brackets and screws are provided for
mounting the unit to adjoining cabinets and
side panels. Each unit has four side-mounting
clips on each side.
IMPORTANT NOTE: For installations where
you are not attaching to a side wall, or you are
installing two Model 427, 427R or Integrated
units together, you must remove the side-
mounting clips before moving the unit into
position. After removing the clips, replace the
screws into the appliance.
A dual installation heater kit (#7007529) is
necessary for anchoring two Model 427, 427R
or Integrated units together. Contact your
Sub-Zero dealer or call 800-222-7820 for
details.
Illus. 15
I N S TA L L A T I O N
L O C K
For Models 427 and 427R, the accessory lock is
attached to the decorative door panel through
a field-drilled hole in the panel. The catch
should be installed on the top of appliance
cabinet before the unit was moved into
position. Installation instructions are included
with the lock kit.
IMPORTANT NOTE: For accessory stainless
steel panels requiring a lock, panels must be
ordered with the lock mounting hole pre-
drilled.
9 0 - D E G R E E
Models 427 and 427R have a 90-degree door
stop built into the hinge system. Use the blade
edge of a standard screwdriver and rotate the
brass cam in the center portion of the hinge
until you reach the stop. You must make this
adjustment to both the bottom and top hinge.
Refer to illustration 15 below.
C O M P L E T I N G
IMPORTANT NOTE: When you have
completed the installation of the Model 427
or 427R Wine Storage unit, refer to pages
34–35 for the Installation Checklist and Service
Information.
Dimensions in parentheses are in
millimeters unless otherwise specified.
I N S TA L L A T I O N
D O O R S TO P
T H E I N S TA L L AT I O N
M O D E L S
4 2 7 | 4 2 7 R
O P T I O N A L
C O M P O N E N T S
Optional installa-
tion components
are available
through your
Sub-Zero dealer,
or call Sub-Zero at
800-222-7820.
You can also visit
our website at
subzero.com.
23
Advertisement
