Perlick RS-CDK Installation Instructions Manual page 11

PERLICK RESIDENTIAL RS-CDK INSTALLATION INSTRUCTIONS
10.
Nitrogen tanks are shipped empty and must be filled prior
to use. Turn the adjusting knob on the regulator counter-
clockwise until the secondary gauge (top) reads zero.
Make sure that the valve at the bottom of the regulator
where the red hose is connected is in the off position as
shown. Watching the secondary pressure gauge, turn the
regulator adjusting knob clockwise until the pressure is at
15 psig. Adjustments can later be made based on flow rates.
IMPORTANT: All pressure adjustments MUST be made when
the shut-off valve is in the OFF position!
11.
Locate the faucet and install onto the dispensing head shanks.
Tighten with supplied spanner wrench. Install black handle(s)
onto faucet(s).
INSTALLATION
perlick customer service (800)558-5592 | 11