Environment Setting - Wiznet WizFi360 Series Quick Start Manual

1. Environment setting

RESET
WizFi360EVB can use the AT command through UART1 and it also can consist that be used as an
Arduino Pin. When it use Arduino Pin or USB of WizFi360EVB, the setting of WizFi360 is as below.
Arduino Pin
WizFi360 Pin and USB
WizFi360io can use the AT command through UART and there are two types of module, wizFi360io-C
and WizFi360io-H.
WizFi360 Quick Start Guide
WizFi360EVB
WiFI
RESET
RTS/CTS Connect and
RXD1/TXD1 connect
and USB or Arduino
JP3 JP2 JP1
SW1(RXD1/TXD1)
OFF
ON
SW2
Arduino Pin
SW1
SW2(RTS/CTS)
ON
OFF
(RTS : 15pin of WizFi360,
CTS : 7pin of WizFi360)
WizFi360io-C
JP3(TXD),JP2,JP1(RXD)
JP3<->D0, JP1<->D1
X