Belling BI602MFPY User Manual page 11

Removing the door from oven (If fitted)
Disassembly of oven door components
1. To remove the door, open the door to the maximum angle. Then
pull the catches on each hinge forward towards you.
2. Close the door to an angle approximately 30°. Hold the door with
one hand on each side. Lift up and slowly pull the door out from
the oven. Do not lift the door assembly by the handle.
3. When the door is fully open, you will see black latches on the
left-hand-side and right-hand-side close to the hinges. Carefully
push these latches outward.
4. Lift up the door outer glass and pull it out, then take the door
middle glass out in the same way.
To reassemble, follow the instructions in reverse, ensuring the glass is re-installed the right way up.
WARNING: Do not forcibly pull on the oven door as this could result in the glass shattering during the
dismantling process
WARNING: The hinge springs could loosen, causing personal injury.
WARNING: Do not lift or carry the oven door by the door handle.
11