Selecting The Right Light Intensity - Philips Lumea BRI864 Manual

Selecting the right light intensity

22_100_5515_2_DFU-Luxury_A6_v3.indd 19
Lumea provides 5 different light intensities and
automatically advices you on the right setting
you should use based on your skin tone. You will
always be able to select the light intensity setting
as you find comfortable.
1 Press the on/off button to turn on the device.
The setting advice starts automatically,
indicated by the setting lights moving from left
to right.
Note: To adjust the light intensity setting manually
without using the skin advice, press the on/off
button again until you have reached the required
setting. The corresponding intensity light level
lights up green.
2 To get the advice on the light intensity, press
the device to your skin.
3 After the device scanned your skin, the
suggested intensity lights will blink green to
indicate which intensities you can use based on
your skin tone.
4 Press the on/off button again to confirm that
you want to use the suggested setting advice
to start using the device.
Philips Lumea will automatically use the highest
suggested intensity, indicated by a continuous
green light.
Lumea gives you the freedom to select the light
intensity that you find most convenient. If you
want to set the light intensity setting manually,
please consult the table below.
19
English
23/06/16 10:15