Leuze electronic IT 1910i Manual
Hide thumbs
Also See for IT 1910i:
- Technical description (25 pages) ,
- Technical description (25 pages)
Table of Contents
Advertisement
Quick Links
Specifications and description
IT 1910i
5 V
DC
Very sturdy hand-held scanner for
Data Matrix codes and bar codes
Larger reading field through higher
resolution and improved decoding
Robust trigger button
Acoustic signal, LED and vibration alarm
following successful reading
RS 232, USB and PS/2 interface
Operating temperature from -30°C
through 50°C
Protection class IP 65
Accessories
RS 232 cable
Part no. 50115105
TTL-RS 232 cable
Part no. 50114517
PS/2 cable
Part no. 50114519
USB cable, 3m
Part no. 50114521
USB helix cable, 5m
Part no. 50114523
Power supply unit
Part no. 50114525
Leuze electronic GmbH + Co. KG
info@leuze.com • www.leuze.com
2D-code hand-held scanner suitable for industrial use
Dimensioned drawing
Electrical connection
for RS 232 cable
9-pin Sub-D
2
3
5
7
8
9
for USB cable
USB type A
1
2
3
4
for PS/2 cable
Mini DIN connector
1
2
3
4
5
6
-
-
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
Signal
Connection for power supply unit
TXD
RXD
GND
external
CTS
RTS
5VDC
internal
Signal
5VDC
Data -
Data +
GND
Mini DIN socket
Signal
-
PC Data
2
3
4
-
PC Clock
6
1
KB data
5
KB clock
IT 1910i RJ41
4
5
3
6
8
7
IT 1910i RJ41
7
10
9
3
IT 1910i RJ41
4
NC
GND
3
5VDC
7
5
NC
8
6
IT 1910i - 01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Leuze electronic IT 1910i
Summary of Contents for Leuze electronic IT 1910i
-
Page 1: Electrical Connection
Part no. 50114523 5VDC PC Clock Power supply unit Part no. 50114525 KB data KB clock Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 IT 1910i - 01 info@leuze.com • www.leuze.com... -
Page 2: Technical Data
RS 232 interface. Order guide Or keyboard-wedge 2D-code hand-held scanner (special optics with large operating range) Part no. operation via PS/2 or USB IT 1910i ER-3 with RS 232, PS/2 and USB interface 50122436 interface. IT 1910i - 01 2013/06... - Page 3 The program can be used to make settings and transfer them to the hand-held scanner. The configuration can also be stored so that it can be reused at a later time. Further information on this can be found in the User's Guide for the IT 1910i/1911i. The standard applications are described and summarized below.
- Page 4 The command for deactivation is: SYN U CR ASCII decimal values: 022; 085; 013 Following a successful read operation, the IT 1910i deactivates itself. The second option is activation via the built-in trigger button. Configuration for the Leuze standard protocol Scan the adjacent 2D-code.
- Page 5 Procedure: 1. Switch off the PC. 2. Connect the interface cable to a free COM port (RS 232) on the computer, to the IT 1910i as well as to the power supply unit (if present). 3. Switch the PC back on.
- Page 6 2. Connect the interface cable to cable KB 021 Z. 3. Scan the adjacent 2D-code. The IT 1910i is set to the following transmission parameters: RS 232 transmission with 9600 baud, 7 data bits, 1 stop bit, even parity, postfixes <CR><LF>.
- Page 7 Connecting the IT 1910i to the PS/2 interface The operation of the IT 1910i in keyboard emulation mode is described in this section. With this operating mode, a PC keyboard is emulated. The read data are written directly into the currently activated program. The data can thereby be further processed in all standard programs.
- Page 8 Connecting the IT 1910i to the USB interface (COM-port emulation) The operation of the IT 1910i as a serial interface on a USB port is described in this chapter. With this operating mode, a COM interface is emulated. The read data are sent to a new COM interface. The drivers with which this COM interface is emulated can be downloaded from our homepage at www.leuze.com.
Need help?
Do you have a question about the IT 1910i and is the answer not in the manual?
Questions and answers