How To Renew A Sentricard; How To Lock The Keypad; Top 5 Things You Should Know About Your Lockbox - Sentrilock Lockbox NXT Series Getting Started Manual

Should the lockbox be in Hardlock Mode while the shackle is out of the lockbox, it may be difficult, if not
impossible, to reinsert it. If this happens, simply re-open the key compartment. When the DND light has
gone out, reinsert the shackle before closing the key compartment.
To allow for keeping the shackle out of the lockbox after re-latching the key compartment, with the intention of
later placing the lockbox on a listing, Hardlock Mode will not engage within 24 hours after the last shackle
release. To force the lockbox into Hardlock Mode at any time, press FUNC + 5 + 9 + ENT on the keypad of
the lockbox. This does not require a SentriCard®.
Last update to this section: Monday, April 5, 2010.
How to Renew a SentriCard®
1. Your SentriCard® will expire if you don't renew it within the period selected by your
Association. To renew your SentriCard®, insert it into the card reader attached to your
PC or your Broker's office PC. The SentriLock Card Utility will display the Login
window. If the SentriLock Card Utility does not display the Login window, click Start |
Programs | SentriLock Card Utility | SentriLock Card Utility.
2. The SentriLock Card Utility will detect your ID and auto fill in the SentriLock ID field
automatically. Enter your password in the Password field.
3. Click the Renew button to renew your SentriCard®. The SentriLock Card Utility may
prompt you to send information from your SentriCard® to the SentriLock Server. Click
OK to send the information. When the SentriLock Card Utility finishes updating your
SentriCard® it displays the Renew Card Summary window. This window displays the
card's new expiration date. Click OK and remove your SentriCard® from the card reader.
Last update to this section: Friday, February 5, 2010.

How to Lock the Keypad

When your lockbox is not on a listing, you probably store it in your office. Before you store the lockbox, you
should lock the keypad. This will prevent unintended activation of the keypad which could prematurely run
down the battery. When you're ready to use the lockbox on a listing, you need to unlock the keypad. To
unlock the keypad, all you have to do is insert a SentriCard® into the lockbox.
1. Insert your SentriCard® into the lockbox. Wait until the CODE light displays, then enter
your PIN and press ENT. Do not remove your SentriCard® from the lockbox.
2. When the READY light displays, press FUNC + 6 + 7 + ENT. The READY light will
display. Remove your SentriCard®. The keypad backlight will flash for several seconds,
indicating that the keypad is being locked. You can test to see if it's locked by holding
down any key for at least one second. Nothing should happen, indicating it is successfully
locked and ready for storage.
Last update to this section: Friday, February 5, 2010.

Top 5 Things you Should Know About your Lockbox

The Lockbox NXT Getting Started Guide contains information about how to use your Lockbox NXT system.
This topic contains some of the more important information you need to know.
NXT Series Lockbox Getting Started Guide Getting Started5