How To Put A Lockbox On A Listing - Sentrilock Lockbox NXT Series Getting Started Manual

4. When using Function 1 to release the shackle, please wait for the motor to reset itself
and the red DND light to go out before re-inserting the shackle. To reinsert the shackle,
firmly press the shackle into the lockbox. The shackle is reversible, so it doesn't matter
which way you insert it. You may have to wiggle it slightly to get it to go into the lockbox.
Make sure you hear or feel a positive "click" that confirms the shackle latch has engaged.
Last update to this section: Thursday, February 4, 2010.

How to Put a Lockbox on a Listing

Attaching your lockbox to a listing is as easy as FUNC + 1, FUNC + 2, and FUNC + 3! Follow these steps to
attach your lockbox to a listing:
1. Insert your SentriCard® in the lockbox.
2. Wait for the lockbox to display the CODE light, then enter your PIN and press ENT. Do
not remove your SentriCard®!
3. Press FUNC + 1 and press the ENT key. The lockbox will make five - triple beeps before
it releases the shackle. Make sure you hold onto your lockbox when you release the
shackle because the shackle will come all the way out of the lockbox. Remove the
shackle from the lockbox. Leave your SentriCard® in the lockbox!
4. Press FUNC + 2 followed by either:


NXT Series Lockbox Getting Started Guide
Figure 2 Removing the shackle from a lockbox
the numeric portion of the listing's street address; or
the numeric portion of the listing's MLS number.
Getting Started3