Appendix F: Troubleshooting & Frequently Asked Questions - Planet Networking & Communication ICA-3460V User Manual

Appendix F: Troubleshooting &
Features
The video and audio codec is
adopted in the device.
The maximum number of users
that accesses the
simultaneously.
The device can be used outdoors
or not.
Installing this device
The network cabling is required for
the device.
The device will be installed and
work if a firewall exists on the
network.
The username and password used
for the first time or after factory
default reset
Forgot the username
password
Frequently Asked Questions
The device utilizes H.265/H.264 compression to provide high-quality
images. The device does not have a built-in audio.
The maximum number of users is limited to 3. However, it also
depends on the total bandwidth accessed to this device from clients.
The maximum data throughput of the device is around 20~25Mbps
for UDP mode and 10Mbps for HTTP mode. Therefore, the actual
device
number of connected clients varies by streaming mode, settings of
resolution, codec type, frame rate and bandwidth. Obviously, the
performance of the each connected client will slow down when many
users are logged on.
The device is weatherproof and could be installed outdoor.
The device uses Category 5 UTP cable allowing 10/100BASE-TX
networking.
If a firewall exists on the network, port 80 is open for ordinary data
communication. The HTTP port, RTSP port, TCP port and TCP
port+1 need to be open on the firewall or NAT router.
Username = admin and password = admin.
Note that it's all case sensitive.
Follow the steps below:
and
1. Open the IP Finder II and search this device.
- 63 -
1080p IR Bullet PoE IP Camera
ICA-3460V