Advertisement
Tools Required:
Lift Table or Floor Jack
Ratchet
APPROXIMATE ASSEMBLY TIME:
IMPORTANT: Please read carefully each part of this document as well as the User Manual prior to
assembling, installing and using the track systems.
INSTALLATION INSTRUCTIONS:
CAUTION: Before beginning the installation, make sure you received all the components
included in the parts lists of the preceding pages.
1. For installation purposes, directional
arrows have been cut out of the main
components in the anchor bracket
kits. These arrows indicate the front of
the vehicle relative to the component.
Figure 6.
PREPARATION:
WARNING: Never place body parts under the vehicle unless it is securely placed on
appropriate stands. Severe injuries could occur if the vehicle collapses or moves. Do not use
a lifting device as a secure stand.
1. Position the vehicle on a flat and level
surface (or on a suitable lifting device),
shift the transmission to neutral and
turn off engine.
2. Identify and position each unit of
the track system near the position
indicated on the sticker. Figure 7.
Torque Wrench
Metric Socket Set
60 minutes
Figure 6
Figure 7
-5-
2 Jack Stands
Metric Wrench Set
Advertisement
