Advertisement
7. Insert step spacers in the steering
limiter assemblies. to get a left and
a right steering limiter assembly. For
correct identification Figure 20.
NOTE: The nuts should be placed
on the bottom side of the clamp
assembly.
8. On each FRONT track system,
position the bended extremity of
steering limiter on stabilizing rod
between hex grip and rubber damper
washer. Figure 21.
9. Attach the stabilizing rod to the
anchor bracket, using the two spacer
bushings, flat washer and nut. Torque
to 52 ft. lbs. (70 Nm). Figure 22.
NOTE: Ensure that parts are
assembled in the correct order.
Up
Spacers
Figure 20
Bended Extremity
Figure 21
Spacer
Bushing
Figure 22
-13-
Rubber Damper Washer
Stabilizing Rod
Anchor Bracket
Stabilizing Rod
Flat Washer
Nut
Front
Advertisement
