Webasto Thermo Top BlueHeat Manual page 11

VW Passat
5
4
5
4
1 2
6
5
4
1
3
2
Fig. 13
Fig. 14
3
Fig. 15
3
Integration into the Blower System With Auto-
matic Temp. Controls - Climatronic
– (1) IPCU base
– (2) Harness from IPCU
– (3) Green/White wire from IPCU pin 86
– (4) Brown wire from IPCU pin 85
– (5) Ground
Insert IPCU into empty base and make connections
1
according to Figure 14.
– (1) IPCU
– (2) Green/White wire
– (3) Connector
2
– (4) Black wire from K3 relay/pin 30
– (5) Red wire from K3 relay - Isolate and secure
Cut, crimp, and shrink black/white wire as shown in
Figure 15.
– (1) Black/White wire - webasto harness
– (2) Black/White wire - blower control
– (3) HVAC blower control module
– (4) Black/White wire at connector
– (5) Red wire from webasto harness to climate control
module
– (6) IPCU harness
11