Maintenance; Blade Replacement - Fieldmann FZR 2014-E Instructions For Use Manual

Electric lawn mower
Table of Contents

Advertisement

8. MAINTENANCE

ATTENTION! Before removing the grass catcher, always turn off the lawn mower and pull the extension
cable plug out of the power socket.
Note: We recommend regularly carrying out the maintenance below, this will increase the lifetime and
reliability of the machine.
Regularly visually inspect the machine for defects such as a loose blade, blade installed upside down, blade
damage or damaged or excessively worn parts.
Also regularly check that the protective covers and protective elements are not damaged and are properly
placed.
Before using the machine, carry out all necessary repairs and maintenance.
If, despite regular maintenance, the machine does not work, please contact our customer service, the repair
should be carried out by our contractual partner in one of the specialised Fieldmann workshops.

8.1 BLADE REPLACEMENT

Contact an authorised service centre.
Always use original spare parts.
Before inspecting the blade, always disconnect the lawnmower from the electricity grid
and check that the motor is turned off.
ATTENTION: Remember that the blade still rotates several seconds after the motor is turned off. Never
attempt to stop the blade. In regular intervals, check that the blade is securely fastened, in good condition
and sharp. If necessary, sharpen or replace it.
In the event that the blade hits an object while mowing, turn the lawnmower off and wait until the blade comes to
a stop. Then check the condition of the blade and its fastening bolts.
If these are damaged or if they have been lost then they must be replaced without delay.
Important: Use protective gloves when working.
Loosen the bolt holding the blade by turning anticlockwise, remove the blade and replace it with a new one.
Check that the new blade is installed in the correct direction. Tighten the screw by turning clockwise.
Turn the lawnmower upside down.
Secure the blade against movement using a screwdriver. Figure 7. 1 .
Loosen the blade bolt and remove the blade. Then retighten fi rmly. Figure 7.2.
ELECTRIC LAWN MOWER
15
EN
Maintenance
USER'S MANUAL

Advertisement

Table of Contents
loading

Table of Contents