Siemens SIMATIC NET CP 5613 A2 Operating Instructions Manual page 14

Green and yellow LED
green lit
green off
green flashing at one second intervals
green and yellow flashing alternately
yellow lit
yellow off
red flashing fast
green and yellow flashing synchronized
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description of the device
2.4 Meaning of the LED display
Function
DP master: Shows the token rotation (in other
words, normal operation).
DP master: Incorrect bus parameters, defective
bus or CP not in operation
DP master: Bad database
Module is being addressed by diagnostics tool to
check installation.
DP slave: Shows polling by the higher-level DP
master: (in other words, normal operation).
DP slave: DP slave connector is not addressed.
Module not started (normal status following
reset).
Exception status (error in firmware)
13