Table of Contents
Advertisement
PM100 Bump Test and Calibration Station
2.2 Features
Simultaneously test four PM
•
•
Rechargeable internal battery lasts up to 1000 bump tests on a single charge
Internal gas cylinder regulator and pressure gauge
•
•
USB flash drive for bump test and event log storage
•
Configuration using the Docking Manager software
Firmware updates using the docking manager software
•
•
Rugged case
Computer not required for normal operation
•
Each person using this equipment must read and understand the information in this
user manual before use. Use of this equipment by untrained or unqualified persons or
use that is not in accordance with this user manual, may adversely affect product
performance.
2.3 Specifications
•
Size: 18.50" x 16.14" x 8.66" (47 x 41 x 22cm)
•
Weight: 18 Lbs. (8.2kg) Without cylinder
•
Operating Temperature: 41° to 104°F (5° to +40°C)
•
Warranty: 2-years
Battery Type: Rechargeable Lithium Ion
•
•
Battery life: ~1000 Bump Tests
•
LEDs: 5 red/green/orange LEDs (1 for each bay, 1 for power indicator)
•
Memory: USB 8GB Standard
•
Log Capacity: Approximately Up to 10 million tests (with 8GB removable USB memory)
Functions performed: Bump Test and Calibration
•
•
Information Stored: Bump/Cal Logs, Individual Monitor Event Logs, Firmware and Unit Configurations
•
Gases Available: CO, H2S and O2
•
Gas Cylinder: Compatible with 58L cylinders
•
Charging Adaptor: 12V DC @ 3A
REV – 1.0
gas monitors
100
R
R
WARNING
[34-2900-0513-2 ]
5 |
P a g e
Advertisement
Table of Contents
