Use Instructions And Limitations; Use For - Macurco AimSafety PM 100 User Instructions

PM100 Bump Test and Calibration Station

2 Use Instructions and Limitations

2.1 Use For

The AimSafety Bump/Calibration Station for PM
monitors. The Bump-Calibration Station utilizes the IR communication of the PM
calibration by pressing only a single button. Operation of the station only requires the use of two buttons. Learning
to use the station takes only minutes.
It is designed to quickly perform bump tests/calibration for multiple PM
detectors simultaneously, which reduces the testing time and gas usage. The Bump-Calibration Station will work
with PM H S, CO, and O
100 2
R R R R
REV – 1.0
is an all-in-one testing/calibration station for PM
100
R R
monitors.
2
R R
[34-2900-0513-2 ]
Monitors to perform testing and
100
R R
monitors. It can test/calibrate up to four
100
R R
portable gas
100
R R
4 | P a g e