Table of Contents
Advertisement
PM100 Bump Test and Calibration Station
5.3.3.2
Save Logs to Computer
The log files can be saved to the computer.
To save the log files to the computer,
1. Select the desired log files to save. Click the Select All check box to select or deselect all log files at once.
Individual log files can be selected by clicking on their respective check box.
2. Click Local Save.
3. A Browse window will open. Navigate to the desired save location. If saving many log files, it may be
advisable to create a folder for the log files.
4. Press OK. The download will start.
5. When the download is complete, a "Log data save success" message will pop-up.
5.3.3.3
Log Information
The log files are saved in a .csv file format. They can be opened by any spreadsheet software.
Each time a test is performed, a log similar to the image below will be created in the Bump-Calibration Station log
file.
Each PM
monitor that is tested using the Bump-Calibration Station will generate its own log file. The image below
100
R
R
shows the information in a sample log file with two test entries.
REV – 1.0
[34-2900-0513-2 ]
19 |
P a g e
Advertisement
Table of Contents
