Mitsubishi Galant Owner's Manual page 314

Hide thumbs Also See for Galant:
Table of Contents

Advertisement

3. You could be injured if the vehicles move. Set the parking
brake firmly on each vehicle. Put an automatic transaxle
in "P" (PARK) or a manual transaxle in "N" (Neutral).
Turn the ignition key to the "LOCK" position.
WARNING
!
Turn the ignition key to the "LOCK" position on
both vehicles. Make sure that the cables or your
clothes cannot be caught by the fan or drive belt.
Personal injury could result.
NOTE
Turn off all lights, heater, and other electrical loads. This
will avoid sparks and help save both batteries.
4. Make sure your battery electrolyte is at the proper level.
(Refer to "Battery" on page 7-15.)
WARNING
!
If the electrolyte fluid is not visible, or looks frozen,
DO NOT ATTEMPT JUMP STARTING!!
The battery might split open or explode if the tem-
perature is below the freezing point or if it is not
filled to the proper level.
5. Connect one end of one jumper cable to the positive (+)
terminal of the discharged battery (A), and the other end
to the positive (+) terminal of the booster battery (B).
NOTE
Open the terminal cover before connecting the jumper
cable to the positive terminal of the battery.
(Refer to "Battery" on page 7-15.)
Use the proper cables suitable for the battery size.
Otherwise heat damage to the cables could result.
Check the jumper cables for damage and corrosion before
use.
For emergencies
6
6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents