Mitsubishi Galant Owner's Manual page 255

Comfort controls
Operating the air conditioning system (automatic
mode)
In normal conditions, use the system in the AUTO mode and
5
follow these procedures:
1. Set the blower speed selection dial to the "AUTO" posi-
tion.
2. Select the temperature control dial to the desired tempera-
ture. The temperature can be set within a range of around
61 to 89. The temperature may be set higher by turning
the dial to the right.
3. Set the mode selection dial to the "AUTO" position.
The vents (except "
blower speed, and ON/OFF of air conditioning will be con-
trolled automatically.
5-18
" and " "), recirculation/outside air,
NOTE
Set the temperature at about 75 under normal conditions.
When the temperature is set to the highest or the lowest
N00731700329
setting under the AUTO operation, the air selection and
the air conditioning will be automatically changed as fol-
lows.
• Quick Heating (When the temperature is set to the high-
est setting)
Outside air will be introduced and the air conditioning
will stop.
• Quick Cooling (When the temperature is set to the low-
est setting)
Inside air will be recirculated and the air conditioning
will operate.
When the temperature is set to the highest setting, you can
turn the air conditioning on.